Series-LCT216

Digital Timer, Tachometer & Counter with Bright Display, 14 Functions

(0)

Models In Stock

Fourteen pre-programmed timer functions
One stage, two-stage, batch, total, and dual counting modes

See Product Overview

Series-LCT216

From ^C$ 204.20

Models In Stock

Shop Models

2 Variations available

See all series options below

Data Sheet

Product Overview

Applications Industrial and Manufacturing, Process Automation and Control
Display Note Two-line 6 digit Negative Transmissive LCD Display
Display Type 6 Digit LCD
Functions 14 pre-programmed
Humidity Range 35 to 85% RH non-condensing
Input Control Signal Dry contact, PNP, or NPN
Operating Temperature, Max 122 °F
Operating Temperature, Min 32 °F
Power Consumption < 10 VA
Reset 0.001 s minimum
Series ID Series-LCT216
Supply Power Note 100 to 240 VAC 50 / 60 Hz; Internal Power Supply: 12 Vdc ±10%, 100 mA
Supply Power Type AC
Supply Voltage 100 to 240 Vac
Weight 4 oz

Supported Applications

The Series LCT216 Digital Timer, Tachometer & Counter by Dwyer is a multi-function instrument designed for mounting in an enclosed panel. It operates as a timer, counter, or tachometer within process control applications requiring versatile timing and counting functions.

Timer
Tachometer
Counter

Operating Conditions & Performance

The Series LCT216 operates under ambient temperatures of 32 to 122°F (0 to 50°C) and humidity conditions of 35 to 85% RH (non-condensing). The device features a two-line 6 digit negative transmissive LCD display that shows the set point, current process value, and operating mode. Performance specifications include a reset time of 0.001 s maximum.

Supply Voltage: 100 to 240 VAC 50 / 60 Hz
Power Consumption: Less than 10 VA
Internal Power Supply: 12 VDC ±10%, 100 mA

Measurement Ranges and Resolution

The instrument supports the following measurement ranges:

Counter: 0 to 99999999 with a resolution of 1
Timer: 0 to 9999.99 with a resolution of 0.01
Tachometer: 0 to 999999 with a resolution of 1

Configuration Options

The Series LCT216 is configurable for different input types and output signals, accommodating specific control requirements. The unit supports Dry contact, PNP, or NPN inputs.

Output Types

LCT216-100: Transistor (NPN open collector 100 mA / 30 VDC residual voltage = 1.5 VDC max)
LCT216-110: Relay (SPST 5 A at 250 VAC)

Both output types are available for Out 1 and Out 2 configurations.

Housing and Mounting

The device features a plastic housing with overall dimensions of approximately 48.0 mm (1.89 in) x 48.0 mm (1.89 in) x 85.22 mm depth, weighing 4 oz (114 g). It is designed for panel mounting using screws tightened to a torque of 0.8 kgf-cm.

Configuration

External DIP switches located on the side of the unit allow programming parameters without front-panel key entry.
The device offers 14 pre-programmed timing functions.

Key Product Differences

Variants within the Series LCT216 differ primarily by output type. The model number guide follows the format LCT216 - <Output Type>. Model LCT216-100 provides a transistor output, while model LCT216-110 provides a relay output.