Need assistance? Call us: 1-800-663-4209
Model-CPS
CPS Cable Pull Switch – Compact, bi-directional with manual reset & indicator
Models In Stock
- NEMA 6, die cast aluminum housing
- 2 SPDT switches
- Highly visible red flag indicating switch status
- Simple installation and wiring
Model-CPS
From
C$
556.51
Models In Stock
Product Overview
- Activation Angles 30 degrees
- Activation Force 11 ± 2.25 lb
- Applications Industrial and Manufacturing, Material Handling
- Control Type Manual Reset
- Electrical Connection 3/4 in NPT female Conduit with Screw Terminal block
- Enclosure Ratings IP67, NEMA Type 6
- Materials Aluminum
- Operating Temperature, Max 140 °F
- Operating Temperature, Min -4 °F
- Series ID Model-CPS
- Switch Rating 10 A @ 125/250 VAC, 1/2 A @ 125 VDC
- Weight 6.4 lb
Supported Applications
The Dwyer Model CPS Cable Pull Switch is designed to provide a switching system to isolate power to conveyor systems or other similar process equipment in the event of a shut-down condition. A steel wire placed along the side of the conveyor attaches to the switch; pulling the cable at any point trips the device, causing the connected equipment to stop.
Operating Conditions & Performance
The series operates within an ambient temperature range of -4 to 140°F (-20 to 60°C). The unit features a die cast aluminum enclosure with a NEMA 6 (IP 67) rating. Activation requires a force of 11 ±2.25 lb. (5 ±1 kg) at an angle of 30 degrees. Electrical ratings are specified as 10 amp @ 125/250 VAC and 1/2 amp @ 125 VDC.
Configuration Options
The Model CPS series offers a universal design for bi-directional activation with manual reset control. Key configuration details include:
- Switch Type: 2 SPDT (Single Pole Double Throw).
- Status Indication: Highly visible red flag to indicate switch status.
- Electrical Connections: Three screw terminals configured as common, normally open, and normally closed.
- Conduit Entries: Two 3/4" female NPT connections.
The compact design facilitates easy installation. Installation notes specify that the maximum length of cable between CPS units is 75 feet; variations in temperature may cause cable expansion and contraction affecting this limit.
Key Product Differences
The series includes the Model CPS-1 variant. The device is not field serviceable; if repair is needed, the unit should be returned to Dwyer for authorization before shipping.
PDFs & Manuals
