Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
RTDM12
Sonde RTD compacte avec filetage de montage et connecteur M12
Compact RTD Probe with Mounting Thread and M12 Connector
Modèles en stock
- Extrêmement robuste
- Connecteur moulé (IP67) à 4 broches avec filetage mâle M12
- Temps de réponse rapide*
- -50 à 120 °C (-58 à 248 °F)
RTDM12
À partir de
C$
74.55
Modèles en stock
Aperçu du produit
- Connexion électrique M12 4 broches mâle
- Caractéristiques nominales du boîtier IP67
- Résistance d'isolation 100 MΩ
- Remarque concernant la résistance d'isolation 100 MΩ avec 100 VCC
- Nombre de fils 4
- Pression, max 40 bar
- Diamètre de la sonde 3 mm
- Taille du raccordement au process 1/8 po
- Température maximale du processus 120 °C
- Température minimale du processus -50 °C
- Temps de réponse 5 s
- ID de série RTDM12
- Type de capteur de température RTD
- Type de thermocouple N/A
This RTD plug sensor is ideal for pressure vessel applications, pressurized containers and applications requiring a temperature sensor with an NPT mounting fitting. The single element design has a 1/8' diameter, 316 stainless steel probe that extends 13 mm (0.51') or 24 mm (0.94') from a 1/8 NPT mounting thread. The M12 connector assures a very reliable connection. Extension cables are offered in different lengths with right or straight angles.
PDF & Manuels
Accessoires
accessories
Afficher les évaluations et les avis
Rated 5 out of
5
by
dbech1 from
Good Sensor
Easy to find and at a good price. Online catalog was easy to navigate.
Date published: 2018-02-13
What is the maximum recommended cable length for these RTDs?
Thank you for your inquiry John. You can use the 3 m long M12CFM-P24STPC-SFSR-FL-3 cable or the 20 m long M12CFM-T24SSPC-SFSR-FL-20 cable with this probe without any issues. Anything longer than these cables, the wire gauge and the wire length would introduce error into the measurement.
Date published: 2022-06-26
Can this temperature used to measure the hot air temperature flowing in a duct or pipe?
Yes, the RTDM12-1/8NPT-3MM-13MM-A can be threaded into a pipe or duct to measure hot air flow.
Date published: 2019-10-15
Can the sensor and the M12 connector be submerged in water ?
Thank you for your inquiry. M12 connectors comply with protection class IP67. This allows for protection from water immersion at a depth of 1 meter maximum for no more than 30 minutes.
Date published: 2024-08-01
What is the accuracy of this probe?
Thank you for the inquiry. Accuracy is IEC 751 class A +/- (0.15 C + 0.2% of reading)
Best regards,
OMEGA
Date published: 2023-10-29
What other accessories are required with this probe to connect it to a Raspberry Pi?
Thank you for the inquiry. Please forward this request to TEMP@DWYEROMEGA.COM.
Best regards
OMEGA
Date published: 2023-10-29
can this probe be used with a controller that accepts 2 or 3 wire inputs
Thank you for your inquiry. Yes these can still be used with devices that accept less RTD wire input.
Date published: 2023-10-18
Is the Compact RTD compatible with the CND3 Temperature and Process PID Controller?
Yes, the CND3 controller will take the input signal from this sensor.
Date published: 2020-03-13
What is the temp coefficient for this? Is it the standard 0.00385 ohm/ohm/C?
Thank you for your inquiry. Yes, it is the European curve 0.00385.
Date published: 2023-08-17