Need assistance? Call us: 1-800-663-4209
LVSW-710-720
Compact 316 SS Ultrasonic NO Level Switch
Models In Stock
- Easy to Install
- No Moving Parts
- Epoxy-Sealed Integral Electronics with Sensor
- Low-Cost Replacement to Mechanical Float
LVSW-710-720
From
C$
416.19
Models In Stock
Product Overview
- Leakage Current < 50 µA
- Materials, Wetted 316L Stainless Steel
- Media Compatibility Clean process / cooling water, Oils / lubricants, Organic solvents
- Operating Pressure, Max 250 psi
- Operating Temperature, Max 80 °C
- Operating Temperature, Min -29 °C
- Process Connection Type NPT Male
- Protection Transient, reverse polarity
- Repeatability 2 mm
- Series ID LVSW-710-720
- Supply Power Type DC
- Supply Voltage 5 to 30 Vdc
- Switch Operation Normaly Open
- Switch Rating 1 A @ 60 or 120 Vac/Vdc
- Switch Type SPST
- Time Delay 0.5 sec
Supported Applications
The Omega LVSW-710/720 series consists of compact solid-state ultrasonic point level switches designed for detecting liquid levels in vessels or pipes. These devices serve as a replacement for mechanical float-type liquid level devices, utilizing proven ultrasonic technology and integral electronics to eliminate issues associated with stickiness and finite mechanical life inherent in moving-part designs.
The series is engineered for reliable operation in virtually any liquid regardless of viscosity. The fully epoxy-sealed electronics combined with 316 LSS wetted materials provide maintenance-free service suitable for side-mounted installations where a compact footprint is required.
Operating Conditions & Performance
The LVSW-710/720 series operates within a process temperature range of -29 to 80°C (-20 to 176°F). The switches are rated for pressures up to 250 psig (1724 kPa) and feature a repeatability of 2 mm or better. Response time is specified at 0.5 sec, with leakage current maintained below 50 uA.
Power requirements span from 5 to 30 Vdc. The electronics include protection against transients and reverse polarity. Wetted materials are constructed from 316 LSS (stainless steel), ensuring durability in liquid environments.
Configuration Options
The series is available in two primary configurations distinguished by process connection size, with specific dimensional envelopes for each model:
- LVS swing-710 (LVSW-710): Features a ¼ NPT thread. Overall length measures 47.6 mm (1.875 in) or 1.975 [50.1mm] depending on the reference document, with an alarm point to thread distance of .375 [9.5mm].
- LVS swing-720 (LVSW-720): Features a ½ NPT thread. Overall length measures 60 mm (2.365 in) or 2.385 [60.1mm], maintaining the same .375 [9.5mm] alarm point to thread dimension.
Both models include a hex nut with a diameter of .75 [19.1mm] and height of .250 [6.35mm]. The switches are wired with color-coded wires (Green, Black, Red, White, Brown) to support different output configurations including Source Output, Sink Output, or Relay Output.
Electrical connections utilize a 300 mm (12") wire length. An optional unregulated 24 Vdc power supply is available under model number PSU-93.
Key Product Differences
The primary distinction between the two models in this series is the process connection thread size:
- LVS swing-710 (LVSW-710): Configured with a ¼ NPT level switch, featuring a 316 LSS SPST NO relay.
- LVS swing-720 (LVSW-720): Configured with a ½ NPT level switch, also featuring a 316 LSS SPST NO relay.
The series carries CE certification and includes a 1-year warranty. Installation requires side mounting; the unit must not be opened in hazardous environments without disconnecting power at the source.
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
Cable User from
Missing document info
I couldn't find any documentation that describes the cable/wire information (gauge, insulation/jacket type, etc), so I wrote this review to provide that:
The cable that was attached to mine is a Belden 9535, and Belden provides a nice spec sheet on their website.
Date published: 2017-06-02
Rated 5 out of
5
by
James1 from
Great Sensor - Would Like to See Future Variations
Sensor operating voltage is versatile
(5-30VDC). My application uses 6VDC.
Sensor is compact enough to make it work in tight areas. It is 1/2” NPT and 3” long.
I would love to see the following variations in the future:
1) Make the wiring via a connector instead of cable coming out connector. This will allow easy removal.
2) If point 1 is not possible, make the cable longer, maybe 6-ft.
3) Make another sensor with longer length; may be 2-in longer. This will allow the shorter one to be used for level control, while the longer used for low level alarm.
Date published: 2021-03-11
Can the sensor be mounted vertically?
Unfortunately, these level switches are only intended for side mounting. Please consider the LVSW-701 as an alternative that can be mounted in any direction.
Date published: 2021-11-17
What Controller or other device does this get attached to?
Thank you for your inquiry. Unfortunately, there are no other device attached or link wit this level switch.
Date published: 2020-12-08
Will this switch operate in a engine coolant type of liquid ie glycol ?
Thank you for your inquiry! Yes, this switch will operate effectively with engine coolant.
Date published: 2021-05-24
Can you provide a CE declaration for the LVSW-710?
Yes, we can. Send us an email to flow@omega.com and we can reply with a copy.
Date published: 2020-06-09
What is the wire gauge and its insulation thickness for this product? What about insulation material?
24 AWG stranded (7x32) tinned copper conductors, semi-rigid PVC insulation,
PVC - Polyvinyl Chloride: Thickness 0.032 in (0.81 mm) and Diameter 0.189 in (4.80 mm)
Date published: 2024-01-11
What is the difference between the LVSW-710 and 720?
Thank you for your inquiry. The LVSW-710 and LVSW-720 have different dimensions. The pdf data sheet above has the full dimensional drawing.
Date published: 2019-11-16
Can I mount the LVSW horizontally and still get accurate sensing?
Yes The manual recommends horizontal installation
Date published: 2020-01-24
Can the LVSW-710/720 sensors be submerged in water - to a depth of about 20ft? I'm considering using a short array of them to measure liquid level movement - the deeper ones would be always submerged and as the test proceeds the level will rise.
Thank you for your inquiry for the level switch. Unfortunately, it cannot be submersed since the cable shown is not water proof, only potted.
Date published: 2021-02-02