1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
FTB1300-Series
316 SS Turbine Flow Meters w/Pulse or Current Output
- ±1% of Actual Flow Accuracy
- Includes 3-point NIST certificate
- Pressure Rating Up to 345 bar (5000 psi)
- Stainless Steel Construction
FTB1300-Series
From
C$
1 981.23
Product Overview
- Accuracy ± 0.5 %
- Certifications CE, RoHS 2
- Frequency Input Range 0.25 Hz to 5 kHz
- Materials, Wetted Nickel, Stainless Steel, Tungsten Carbide
- Media Compatibility Liquids
- Operating Pressure, Max 5000 psi
- Process Connection Type NPT Male
- Supply Current 8 mA
- Supply Voltage 20 to 28 Vdc
- Volumetric Flow Rate, Min 0.3 l/min
The FTB-1300 Series of turbine flow meters are designed for industrial and laboratory measurement of water, solvents and other low viscosity fluids. The FTB-1300 Series turbine flow meters feature a 316 stainless steel body and a tungsten carbide bearing. They offer good accuracy and reliability with very little pressure drop. The standard turbine flow meters feature threaded end connections.
The FTB-1300 series of turbine flow meters is designed with a wear resistant rotor assembly to provide trouble free operation and a long service life. Fluid moving through the flow meter causes the rotor to turn at a speed proportional to the flow rate, and as the rotor blades cut through the magnetic field of the pickup, an electronic pulse is generated. The pulse train is used to represent the actual flow or total amount of fluid passing through the flow meter. The number of electronic pulses generated per unit volume is known as a K-factor. The value is constant over each flow meter’s operating range, and is unique to each meter.
SPECIFICATIONS
Pressure Max: 345 bar (5000 psi)
Wetted Materials: Stainless Steel (316L, 303 and 1.4122) and carbide with nickel binder (be sure that the operating fluid is compatible with these materials)
Outputs
Square Wave (FTB-1300 Models):
Supply Voltage: 10 to 28 Vdc
Supply Current: 8 mA @ 12 Vdc, 12 mA @ 24 Vdc
Duty Signal: 50% ± 15%
Minimum Signal: 0.5 Hz
Frequency Output: Flow dependent, up to 2000 Hz
Driving Capacity: 50 mA Max resistive load
Output Impedance: ~40?, analog switch and self-resetting fuse
Temperature Range: -40 to 85°C (-40 to 185°F)
Current (FTB-1310 Models):
Supply Voltage: 10 to 30 Vdc
Input: 0.25 Hz to 5 kHz
Update Time: 1/F + 25 msec
Amplitude: 1V p-p to 40V p-p
Linearity: ± 0.01% of reading
Output: 4 to 20 mA
Enclosure Certifications: NEC Class I Groups C, D; Class II Groups E, F, G
Temperature Range: -40 to 85°C (-40 to 185°F)
The FTB-1300 series of turbine flow meters is designed with a wear resistant rotor assembly to provide trouble free operation and a long service life. Fluid moving through the flow meter causes the rotor to turn at a speed proportional to the flow rate, and as the rotor blades cut through the magnetic field of the pickup, an electronic pulse is generated. The pulse train is used to represent the actual flow or total amount of fluid passing through the flow meter. The number of electronic pulses generated per unit volume is known as a K-factor. The value is constant over each flow meter’s operating range, and is unique to each meter.
SPECIFICATIONS
Pressure Max: 345 bar (5000 psi)
Wetted Materials: Stainless Steel (316L, 303 and 1.4122) and carbide with nickel binder (be sure that the operating fluid is compatible with these materials)
Outputs
Square Wave (FTB-1300 Models):
Supply Voltage: 10 to 28 Vdc
Supply Current: 8 mA @ 12 Vdc, 12 mA @ 24 Vdc
Duty Signal: 50% ± 15%
Minimum Signal: 0.5 Hz
Frequency Output: Flow dependent, up to 2000 Hz
Driving Capacity: 50 mA Max resistive load
Output Impedance: ~40?, analog switch and self-resetting fuse
Temperature Range: -40 to 85°C (-40 to 185°F)
Current (FTB-1310 Models):
Supply Voltage: 10 to 30 Vdc
Input: 0.25 Hz to 5 kHz
Update Time: 1/F + 25 msec
Amplitude: 1V p-p to 40V p-p
Linearity: ± 0.01% of reading
Output: 4 to 20 mA
Enclosure Certifications: NEC Class I Groups C, D; Class II Groups E, F, G
Temperature Range: -40 to 85°C (-40 to 185°F)
| Model No. | Fittings | Range LPM | Range GPM | Output/Description |
|---|---|---|---|---|
| FTB-1301 | ½ NPT | 0.3 to 1.5 | 0.08 to 0.4 | Amplified square wave 60 cm (24") cable |
| FTB-1302 | ½ NPT | 1.1 to 11 | 0.3 to 3 | |
| FTB-1303 | ½ NPT | 3.4 to 34 | 0.9 to 9 | |
| FTB-1304 | ½ NPT | 6 to 60 | 1.6 to 16 | |
| FTB-1305 | 1 NPT | 6 to 60 | 1.6 to 16 | |
| FTB-1306 | 1 NPT | 11 to 121 | 3 to 32 | |
| FTB-1307 | 1½ NPT | 19 to 200 | 5 to 53 | |
| FTB-1308 | 2 NPT | 49 to 757 | 13 to 200 | |
| FTB-1311 | ½ NPT | 0.3 to 1.5 | 0.08 to 0.4 | 4 to 20 mA, industrial head electronics enclosure |
| FTB-1312 | ½ NPT | 1.1 to 11 | 0.3 to 3 | |
| FTB-1313 | ½ NPT | 3.4 to 34 | 0.9 to 9 | |
| FTB-1314 | ½ NPT | 6 to 60 | 1.6 to 16 | |
| FTB-1315 | 1 NPT | 6 to 60 | 1.6 to 16 | |
| FTB-1316 | 1 NPT | 11 to 121 | 3 to 32 | |
| FTB-1317 | 1½ NPT | 19 to 200 | 5 to 53 | |
| FTB-1318 | 2 NPT | 49 to 757 | 13 to 200 |
PDFs & Manuals
Accessories
meters/controllers
Turbine Flow Meters Recommended for use with ftB-1311 through ftB-1318
C$145.15
4 In Stock
Show Ratings & Reviews
Rated 5 out of
5
by
Reliable and accurate from
Reliable accuracy
After repeated testing and verification, these sensors prove to be accurate (again).
Date published: 2020-11-13
FTB-1300 cut sheet says it can be used for water and other low viscosity liguids. The liquid in our system has an abs. viscosity of 0.64. Is the accuracy of the flow meter significantly affected by the lower viscosity? Is there a correction graph?
Thank you for your inquiry about the turbine flow meter. The FTB-1300 flow meter can measure a less viscous liquids and it will maintain its accuracy and you will need to field calibrate since it is calibrated for water at 1 cP. It would be recommended to use a positive displacement flow meter that is independent of viscosity and changes in temperature.
Date published: 2022-12-12
Can it be used to measure refrigerants flow rates ?
Thank you for your inquiry about the turbine flow meter. It can measure this liquid, yet, you will need to perform a field calibration since it is calibrated for water. If you email flow@omega.com we can suggest an alternative flow meter that can measure refrigerants without field calibration.
Date published: 2021-10-15
What are the dimensions of the 4 to 20 mA transmitter found attached to the FTB-1311 to FTB-1318? It is simply described as an "Ex housing" in Omega literature.
Thank you for your inquiry about the turbine flow meter. Please email flow@omega.com and can provide the information per your request.
Date published: 2021-01-28
Is there a rebuild kit for this meter
Thank you for your inquiry about the turbine flow meter. Yes, the FTB-1300 flow meter series has a repair kit and the part number for the specific part number is FTB-137-RK
Date published: 2021-08-25