LDC7

304 Stainless Steel Cartridge Heater 0.88 in OD 3.5 to 22 in Long

Models In Stock

test feature bullets
Cost Effective Cartridge Heaters of Uncompromised Quality
Low Watt Densities 3.1 to 7.0 W/cm² (20 to 40 W/in²) (Depending on Heater Size and Operating Temperature)
Standard 304 Stainless Steel Sheath Material Provides High Temperature Strength, Good Thermal Conductivity and Resistance to Oxidation
U.L. Component Recognized*

LDC7

From ^C$ 108.85

Models In Stock

Shop Models

3 Variations available

Data Sheet

Product Overview

Actual Heater Diameter 2 m
Additional Features 1 Connector_Test
Additional Features 2 Connector_Test
Amperage, Max 15 A
Applications Dies, Food Processing Equipment, Glue Guns, Heat Sealing Equipment, Heating Gases, Heating Liquids, Labeling Machines, Laminating Equipment, Molds, Packaging Equipment, Refrigeration, Shoe Machinery, Wax Pots
Camber Tolerance 0.254 mm per foot of length
Diameter Tolerance ± 0.002 in
Electrical Connection JST BH Connector
Heater Diameter 0.875 in
Lead Length 10 in
Length Tolerance 1.59 mm (± 1⁄16") up to 152 mm (6") long; 3.18 mm (± 1⁄8") over 152 mm (6") long
Operating Temperature, Max 1200 °F
Operating Voltage, Max 480 Vac, 480 V
Power Density 31 W/in²
Power Density Note 3.1 to 7.0 Watt/cm2 (20 to 45 Watt/in2) depending on heater size and operating temperature
Power Tolerance +5%, -10%
Resistance Tolerance +10%, -5%
Series ID LDC7
Sheath Material 304 Stainless Steel
Supply Voltage 120 Vac