Need assistance? Call us: 1-800-663-4209
TL-10
10 Point Non-Reversible Temperature Label
Models In Stock
- Ten temperature points per label
- Indicator turns black when exposed
- Actual size: 2.1' x 0.7' (54 x 18 mm)
- Sold in Packs of 10 and 30
TL-10
From
C$
34.14
Models In Stock
Product Overview
- Accuracy Detail Up to 99°C (210°F) is ± 1°C (1.8°F); From 100°C (212°F) to 154°C (309°F) is ± 1.5°C (2.7°F); From 160°C (320°F) to 280°C (536°F) is ± 1% and ± 1°C (1.8°F
- Applications Aeronautics and Aerospace, Air and HVAC, Building and Maintenance, General Purpose
- Form factor Strip with 10 Dots in line
- Height 54 mm
- Length 18 mm
- Number of Temperature Points 10
- Response Time 1 sec
- Reversible/Non Reversible Non-Reversible
- Series ID TL-10
The 10 Point Non-Reversible Temperature Label provides a quick visual temperature indication across 10 points, with an accuracy of ±1°C. Featuring a strip design with 10 dots in line, it offers a 1-second response time for fast readings. This label is non-reversible, ensuring reliable, one-time temperature monitoring within the specified range.
Applications:
• General • Aeronautical • Electrical • HVAC • Most surface measurements.
Show Ratings & Reviews
Hello, referring to an older inquiry: We'd like to use the labels for vaccum applications. Why is this not recommended? Is the reaction mechanism/precision altered or does the glue degas? What is the reaction mechanism of the sensors?
Hi Phil74
Thank you for the inquiry. The labels are verified on a silver hot plate for accurate response at standard ambient conditions. Vacuum condition may cause different response point within the chemical mixture used for the indicating dot. The chemical mixture which has a reaction based on temperature is the mechanism of these labels.
Best regards
OMEGA
Date published: 2021-01-15
What is the shelpf life of these tapes if stored in the fridge?
Shelf life is one year when stored in a cool dry location.
Date published: 2025-03-12
Will these labels only measure surface temperature of where its mounted or the air around it too? (conduction/convection). Want to detect max temperature of product going through oven.
The Temperature Labels are designed to measure the surface temperature of what they are adhered.
Date published: 2021-11-19
What is the reaction time for the strip to change color. I want to test an overcurrent event that could be less than a second. The conductor I am using should heat up momentarily and then cool off. is 1 second enough of a contact to change color?
The response time for the temperature labels is one second so it is not 100% positive that it will react quickly enough for this application.
Date published: 2024-01-09
Does the surface to which you apply the label need to be 100% flat? If not, what is the most curved surface these labels can be applied to?
The Temperature Labels are flexible and can be attached to a curved surface. The bend radius has not been established but down to a 1/2" should be fine.
Date published: 2021-11-09
What's the thickness of the stickers? Webpage and Spec sheets only gives Height and Width. Thanks
The approximate thickness of the TL temperature labels is 0.026".
Date published: 2023-12-01
can we use it in vacuum chambers. 5e-6 at
Thank you for your inquiry. Unfortunately these labels are not suitable for vacuum applications.
Date published: 2020-10-23
It seems a strip could be cut into individual dots. Does cutting the strip into separate dots affect temperature indication or have other impact? Does cutting the strip risk leaking of a chemical or other material/liquid?
Thank you for your inquiry Peter. Cutting or modifying the strips in any way will permanently damage the strip and it will not longer measure temperature.
Date published: 2022-10-21