Need assistance? Call us: 1-800-663-4209
PTC-1A-series
1/16 DIN LCD Industrial Timer with 6 Programmable Time Ranges
Models In Stock
- Compact 1/16 DIN Size
- Easy 2-Button Set-Up
- Clear LCD Display
- Panel or Socket Mount Design
PTC-1A-series
From
C$
368.66
Models In Stock
Product Overview
- Accuracy ± 20 ms or ± 0.5 % of set time
- Contact Rating SPDT relay, rated 7 A at 30 Vdc/240 Vac resistive
- Cutout Dimensions 45 x 45 mm
- Display Type 3 Digit Display
- Electrical Life 200,000 operations at rated load
- Form factor 1/16 DIN
- Frequency 47 to 440 Hz
- Height 48 mm
- Isolation 1500 Vac 50 Hz
- Length 89 mm
- Mechanical Life 10 million operations
- Number of Relays 1
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Power Consumption 1 W
- Reset 10 ms
- Series ID PTC-1A-series
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -20 °C
- Supply Power Type AC/DC
- Timer Range 0.1 to 9.99 sec, 0.1 to 99.9 sec, 0.01 to 9.99 min, 0.1 to 99.9 min, 0.01 to 9.99 hrs, 0.1 to 9.99 hrs
- Width 48 mm
Supported Applications
The Omega PTC-1A series is a 1/16 DIN LCD industrial timer designed for automation and control applications requiring programmable time ranges. The device features an integrated display to indicate timing status.
Operating Conditions & Performance
No specific operating conditions, performance metrics, or environmental ratings are documented in the available source data for this series. Technical specifications regarding accuracy, response times, and ambient limits are not provided.
Voltage and Power Requirements
Power supply requirements and electrical input ranges are not specified in the current documentation bundle.
Configuration Options
The series is identified by a single enabled variant, model PTC-1A. The product title indicates support for six programmable time ranges; however, specific range values (e.g., seconds to hours) are not enumerated in the source data.
Configuration and Display
- Housing Size: 1/16 DIN format as indicated by the series title.
- User Interface: LCD display for timing indication.
- Programmability: Supports six distinct time ranges per the product description.
Key Product Differences
The available documentation lists only one model, PTC-1A. No alternative housings, output types, or sensor configurations are documented for this series in the current bundle.
Show Ratings & Reviews
Rated 3 out of
5
by
ControlFreq from
Easy To Use Pay Attention To Review
This was easy to setup, but there are a few challenges. Do not use this in conjunction with an LED indicator. An LED indicator will cause the trigger circuit to instantly trigger, prior to the trigger input. Also when updating the time, the new programmed time will not display until either the completion of the next timing event, or a power cycle. When using in a panel mount application, I recommend wrapping the plastic clips with TyWraps to keep the latches tight against the relay. The PTC-1A shipped with the relay, the octal base with terminal points/screws, and the panel mount hardware. This is everything required to mount to a Panel face, or a backplane by screwing the base down.
Date published: 2019-05-01
what is the ptc-sw switch? The product manual from 1978 doesn't mention it.
Thank you for your inquiry. The use of the PTC-SW momentary switch, included with the PTC-1A, allows cycle reset from a remote location for the PTC-1A.
Date published: 2022-09-01
What is the relay amp rating?
Thank you for your inquiry. The Single-Pole Double-Throw Relay is rated 10A @ 30VDC/240VAC resistive load only. Limited to 7A if used with socket.
Date published: 2024-12-31