Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
PX2780
Barometric Pressure Transducers with Terminal Strip
터미널 스트립이 있는 기압 센서
Models In Stock
- 환경 모니터링 시스템
- 기상 측정 시스템
- 환경 데이터 로깅
- 실험실 및 시험소 모니터링
PX2780
From
1,882,195
원
Models In Stock
Product Overview
- 파열 압력 최대 29 psi
- 최대 보상 온도 60 °C
- 최소 보상 온도 -40 °C
- 전기 연결 탈착식 나사 단자
- 전기 출력 0 ~ 5V
- 미디어 호환성 깨끗한 건조 공기 / 불활성 가스, 연료 가스, HVAC / 실내 공기, 비활성 가스/비반응성 가스
- 장착 장착판
- 작동 온도, 최대 60 °C
- 최소 작동 온도 -40 °C
- 출력 저항 <10 Ω
- 출력 신호 전압
- 프로세스 연결 크기 1/8인치
- 프로세스 연결 유형 호스 바브 피팅
- 증명압 최대 1500 hpa
- 해상도 0.1 hPa
- 응답 시간 <100 ms
- 감도 영향 <± 0.09% 풀 스케일/50 °C
- 시리즈 ID PX2780
- 스팬 설정 조정 범위 ± 5 mV
- 안정성 <± 0.1
- 안정성 사양 참고 장기 안정성: <± 0.1 hPa (mb)/년
- 저장 온도, 최대 120 °C
- 보관 온도 최소 -60 °C
- 공급 전력 참고 9.5~28 Vdc (3 mA 동작 모드, 1 µA 절전 모드) 3선 또는 4선 회로
- 공급 전압 9.5 ~ 28 Vdc
- 스팬 오차에 미치는 열 효과, 최대 ± 1% 게이지
- 워밍업 편차 <0.1 hPa (mb) 최대값
- 워밍업 시간 <1 s
- 무게 137 g
- 영점/밸런스 오차 <± 0.18% 전체 범위/50°C
- 제로 설정 조절 범위 ± 5 mV
Supported Applications
The Omega PX2780 Series consists of high accuracy barometric pressure transducers designed for applications in industry and science where accuracy, fast dynamic response, and long-term stability are important. These units sense absolute pressure and convert it to a proportional high-level analog output. The series is intended for use with non-condensing air or gas.
Operating Conditions & Performance
The PX2780 operates within an ambient temperature range of -40 to 60°C (-40 to 140°F) and a process temperature range of -40 to 60°C (-40 to 140°F). Storage temperatures are rated from -60 to 120°C (-76 to 248°F). The unit features a response time of <100 ms. Accuracy varies by barometric range and temperature, expressed as RSS (Root Sum Square) of end point non-linearity, hysteresis, non-repeatability, and calibration uncertainty:
- 500 to 1100 hPa (mb) Range: ±0.6 hPa at 20°C; ±2.5 hPa across -40 to 60°C.
- 600 to 1100 hPa (mb) or 600 to 1060 hPa (mb) Range: ±0.5 hPa at 20°C; ±2.0 hPa across -40 to 60°C.
- 800 to 1100 hPa (mb) or 800 to 1060 hPa (mb) Range: ±0.3 hPa at 20°C; ±1.5 hPa across -40 to 60°C.
The sensor resolution is 0.1 hPa (mb). The pressure rating is 1500 hPa (mb) with a burst pressure of 2000 hPa (mb).
Electrical Specifications
- Excitation Voltage: 9.5 to 28 Vdc.
- Output Signal: 0 to 5 Vdc (available with 3- or 4-wire circuit).
- Power Consumption: 3 mA in operate mode; 1 µA in sleep mode.
Configuration Options
The series is packaged in a rugged stainless steel and polyester case. A removable 5-pin terminal strip (BL 3.5 screw clamp) facilitates connections, with four-wire connection recommended to avoid voltage drop in the negative power line.
- Process Connection: ¼" barbed fitting (0.290 in diameter).
- Housing Dimensions: Depth: 90.3 mm (3.56 in); Height: 76.7 mm (3.02 in); Width: 59.9 mm (2.36 in). Mounting hole diameter is 0.140 in.
- Weight: 137 g (4.8 oz).
The unit includes a sleep mode that draws only 1 micro amp, allowing almost instant turn-on and reading for remote applications. It is shipped in sleep mode and requires an external trigger to activate; terminal 1 can be jumpered to terminal 4 for continuous operation.
Key Product Differences
The PX2780 series offers five specific model configurations distinguished by barometric range:
- PX2780-500B5V: 500 to 1100 hPa (mb).
- PX2780-600B5V: 600 to 1100 hPa (mb).
- PX2780-600NB5V: 600 to 1060 hPa (mb).
- PX2780-800B5V: 800 to 1100 hPa (mb).
- PX2780-800NB5V: 800 to 1060 hPa (mb).
All models feature a high accuracy ceramic sensor coupled with a digital compensation circuit using a custom ASIC. Each unit comes complete with an NIST traceable calibration certificate and operator's manual.