検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

SLK-SLF

1/4インチ径プローブ用スプリング内蔵継手

  • 直径¼インチのプローブ(RTD、熱電対、またはサーミスタ)に簡単に取り付け可能
  • 自己保持スプリング設計により無制限の調整が可能
  • サーモウェル内の交換センサー取り付けに最適
  • スプリング式フィッティングは多様な½ NPT接続ヘッドに使用可能
SLK-SLF
販売元 ¥ 9,751
1/4インチ径プローブ用スプリング内蔵継手 SLK-SLF SLK-SLF
loading all models
製品の概要
  • 内径 0.25 m
  • プロセス接続サイズ 1/2インチ
  • プロセス接続タイプ NPT オス
  • シリーズID SLK-SLF
  • シース材質 ステンレス鋼

Supported Applications

The Omega SLK/SLF series provides spring loading options designed for the installation of sensors into thermowells and other applications. These fittings are engineered to simplify sensor installation on any ¼" diameter probe, including RTD, Thermocouple, or Thermistor types. The self-gripping spring design offers unlimited adjustability, making these components suitable for installing replacement sensors in existing thermowell configurations.

Operating Conditions & Performance

The series is manufactured to be RoHS compliant and Made in USA. While specific operating temperature ranges or pressure ratings are not defined in the source documentation, the spring material is specified as 0.89 (0.035) diameter music wire conforming to ASTM A228.

Configuration Options

The SLK/SLF series supports two primary configurations for ½ NPT connection heads and ports:

  • ¼-SLK Spring Loading Kit: Includes a hex housing with ½ NPT male thread and a self-gripping spring. The overall dimension of the hex housing is 26.97 mm (1.062 in).
  • SLF-12-12-14 Spring Loaded Fitting: A fitting with ½ NPT male threads on both ends, containing a self-gripping spring inside the housing. The overall dimension is 47.75 mm (1.88 in).

Both variants are designed for probes with a diameter of 0.25" (¼"). Installation instructions are included with each unit.

Installation and Adjustment Details

  • For the ¼-SLK: The hex housing slides onto the probe with the ½ NPT threads oriented toward the thermowell or attachment point. The self-gripping spring is then slid onto the probe with the wide end facing the hex housing and positioned as needed.
  • For the SLF-12-12-14: Installation involves sliding the probe tip into the larger opening of the fitting, twisting clockwise while pushing through. The assembly can be pulled to re-adjust the position if required.

Dimensional Specifications

  • Gripping end of spring (SLF-12-12-14): 44.45 mm (1.75 in).
  • Housing dimensions: As noted above for the specific model variants.

Key Product Differences

The primary distinction between the two models lies in their physical configuration and intended mounting interface:

  • The ¼-SLK is a spring loading kit comprising a separate hex housing with ½ NPT threads, designed to be assembled onto an existing probe.
  • The SLF-12-12-14 is a complete fitting featuring ½ NPT male threads on both ends with the self-gripping spring pre-installed within the housing structure.
ja-JP
ja_JP
設定を保存する