Duct and Enclosure Heaters

316 stainless steel duct heaters designed for low flow air, gas, water or aqueous solutions installed inline that go up to 800°F and 1.2 kW of power.

316 Stainless Steel duct heaters installed inline that go up to 1000°F and 0.75 kW of power. Made for drying, laminating, packaging and other similar applications.

Fiberglass heater rope 900°F Max, stripped leads, designed to wrap around small diameter pipes and tubes. Can easily connect to existing temperature controllers.

Silicone rubber heater tape 425°F Max, integrated thermostat, 2-prong plug, designed for freeze protection and more. Can easily connect to existing temperature controllers.

Fiberglass heater tape 900°F Max, stripped leads or 2-prong plug, designed for maintenance heating. Can easily connect to existing temperature controllers.

Silicone rubber heater tape 425°F Max, integrated thermostat, 2-prong plug, designed for actuators, bearings and more. Can easily connect to existing temperature controllers.

The Silicone Rubber Enclosure Heaters are offered up to 250 W with or without an included thermostat, and are vulcanized to an aluminum plate for installation.

The Compact Enclosure Fan Heaters offer a high power output (60 to 230W) relative to their size using a PTC heating element, and can operate up to 70°C.

The Surface Spot Heaters are ideal for single component, compact heating up to 13W, while being able to operate up to 70°C.

High airflow nickel chrome cross frame element duct heaters installed via flange fitting that go up to 600°F and 2 kW of power. Used with blowers for recirculating air.

The Touch-Safe Enclosure Heater is offered as 10 and 20W and has a low surface temperature due to its double insulated construction, and a built-in thermostat.

The Touch-Safe Enclosure Heater is offered up to 150W featuring a low surface temperature due to its double insulated construction, and a built-in thermostat.

The Low Inrush Current Enclosure Heaters are available up to 65W optimized for a low inrush current, and operates up to 70°C with a plastic heat guard.

Enclosure Fan Heaters available as 550 or 650W with adjustable thermostat are mountable vertically on DIN rail systems for even heating of a control cabinet.

High temperature incoloy tubular element duct heaters installed via flange that go up to 1200°F and 270 kW of power. For dehumidification, re-heating and heat treating.

The Compact Enclosure Fan Heaters offer a high power output (10 to 40W) relative to their size using a PTC heating element, and can operate up to 70°C.

The Miniature Semiconductor Enclosure heater is ideal for small enclosures with 13W and a wide range of supply voltages, and can operate up to 70°C.

The Vertical Compact Fan Heaters offer a high power output (100 to 400W) relative to their size using a PTC heating element, and can operate up to 45°C.

The Natural Convection Enclosure Heater is available up to 100W and rated up to 200°C using PTC heater technology with no switching components.

Brass or stainless steel square duct heaters installed inline that go up to 440°F and 50 kW of power. Side terminal and bottom terminal options available.