OM-CP-RFPULSE2000A-Series

Supported Applications

The Omega OM-CP-RFPULSE2000A is a wireless data logger designed to record pulse output signals from sensors such as flow meters and anemometers. The device captures both pulse count and pulse rate, enabling the calculation of engineering units in rates per second, minute, hour, or day for long-term monitoring.

Operating Conditions & Performance

The OM-CP-RFPULSE2000A samples at 100Hz while recording data at a user-specified reading rate. The device features an internal pull-up of 2.88V@ 250uA and supports a maximum input voltage of 30V.

Key performance characteristics include:

• Measurement Type: Pulse output signals
• Sampling Rate: 100Hz
• Input Voltage Limit: Maximum input voltage is 30V.
• Polarity Configuration: Supports external power supplies (e.g., 9V Logic) or internal pull-up connections; either port can be used for switch connections.

Configuration Options

The series includes a display screen providing instant access to current readings, minimum, maximum, and average statistics. Through accompanying software, the device can be programmed to convert pulse outputs into specific units of measure such as gallons per minute or miles per hour.

• Display: LCD screen showing real-time data and statistical summaries
• Data Conversion: Configurable engineering units via software (e.g., rates per second, minute, hour, day)
• Mounting Options: Includes a base that snaps to the bottom for table-top or horizontal surface mounting; the same base can snap to the backside of the logger for wall mounting using two screw holes.
• Power & Connections: Terminal ports located on the bottom (one positive, one negative); supports internal pull-up or external power supply configurations.

Key Product Differences

The OM-CP-RFPULSE2000A is offered as a single model within this series. The device distinguishes itself by calculating both pulse count and pulse rate, providing enhanced statistical utility for extended data logging periods compared to simple counters.