Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
WMS-20-Series
Wind Monitoring Station with Alarms and Analog Outputs
- 0 to 100 mph Measurement Range
- Reed Switch Transducer
- 1 mph or 3% Accuracy
WMS-20-Series
From
€
1.452,37
Product Overview
- Air Velocity, Max 100 m/h
- Air Velocity, Min 0 m/h
- Cable Length 40 ft
- Enclosure Type Gasketed Wall Mount NEMA Enclosure
- Form factor Portable
- Resolution 0.1 MPH
- Transducer Type Reed Switch
The WMS-20 series consist of three individual wind monitor stations. The WMS-21 is a microprocessor based wind alarm station. It sounds an alarm buzzer and controls the operation of two electrical circuits whenever wind speed reaches either of two independent setpoints. An LCD display provides a readout of the measured wind speed and is also used to set the value of the setpoints. Self-contained relays for each alarm point can be used to actuate external devices such as air samplers or sirens.
The WMS-22 series monitors wind speed and direction. Each parameter is converted into a 4 to 20mA signal for use by process controllers or monitoring systems. Two versions are offered, WMS-22A measures wind speed only, while the WMS-22B measures both wind speed and direction.
The WMS-22 series monitors wind speed and direction. Each parameter is converted into a 4 to 20mA signal for use by process controllers or monitoring systems. Two versions are offered, WMS-22A measures wind speed only, while the WMS-22B measures both wind speed and direction.
PDFs & Manuals
