OM-CP-ETR101A-KIT-Series

Wasserdichtes Thermoelement-Datenaufzeichnungssystem mit Fernsonde

Waterproof Thermocouple Data Logging System with Remote Probe

Komplettes System – Enthält Datenlogger, wasserdichtes NEMA 4 (IP65) Gehäuse, Typ-K Thermoelementsonde, USB-Schnittstellenkabel und Windows-Software
10 Jahre Batterielebensdauer
1 Sekunde Abtastrate
Mehrfach-Start/Stopp-Funktion

Produktübersicht anzeigen

Von ^€ 486,71

Modelle einkaufen

1 Variationen verfügbar

Alle Serienoptionen unten anzeigen

Datenblatt

Produktübersicht

Zusätzliche Merkmale 1 Wasserdichtes NEMA 4 (IP65) Gehäuse
Alarmverzögerung Programmierbare Zeitverzögerung
Batterielebensdauer bis zu 10 Jahre
Batteriegröße und -typ 3,6 V Li-Ion
Kabellänge 762 mm
Datenschnittstelle USB
Hinweis zur Datenschnittstelle USB (Schnittstellenkabel erforderlich); 115.200 Baud
Elektrischer Anschluss Miniatur-Buchse für Thermoelementanschluss ohne Fenster
Höhe 16 mm
Interner Kanal Kalibrierte Genauigkeit ± 0,25°C
LED-Anzeigen Grüne LED blinkt: 10 Sekunden lang, um die Protokollierung anzuzeigen 15 Sekunden lang, um den verzögerten Startmodus anzuzeigen; Rote LED blinkt: 10 Sekunden lang, um einen niedrigen Batteriestand und/oder einen vollen Speicher anzuzeigen 1 Sekunde lang, um einen Alarmzustand anzuzeigen
Länge 36 mm
Messart Temperatur
Speicher 500000
Hinweis zum Speicher 500.000 Messwerte
Anzahl der Messungen 2
Betriebstemperatur, max. 80 °C
Betriebstemperatur, min. -20 °C
Sondendurchmesser 3.2 mm
Sondenlänge 153 mm
Prozesstemperatur, max. 80 °C
Prozesstemperatur, min. -40 °C
Echtzeitaufzeichnung Das Gerät kann mit einem PC verwendet werden, um Daten in Echtzeit zu überwachen und aufzuzeichnen.
Genauigkeit des Fernkanals ± 2,0°C
Fernkanaltemperatur -270 bis 1070 °C
Abtastrate 1 Hz (1 Aktualisierung/Sekunde)
Hinweis zur Abtastrate 1 Messwert pro Sekunde bis 1 Messwert alle 24 Stunden.
Serien-ID OM-CP-ETR101A-KIT-Series
Softwarekompatibilität Windows® XP/VISTA/7 und 8 (32- und 64-Bit)
Art der Stromversorgung Batterie
Temperaturgenauigkeit ± 0,1 °C
Temperatursensor-Typ Thermoelement
Hinweis zum Temperatursensortyp Thermoelement
Widerstand des Thermoelements, max. 100 Ω
Zeitgenauigkeit ±1 min/Monat
Tiefe der Wasserbox 27 mm
Höhe der Wasserbox 87 mm
Breite der Wasserbox 73 mm
Gewicht 425 g
Breite 56 mm
Drahtstärke 24 AWG

Supported Applications

The OM-CP-ETR101A-KIT is a complete Thermocouple Temperature Data Logging System with a waterproof NEMA 4 (IP65) enclosure and remote probe. The kit includes a data logger, the waterproof enclosure, a Type K thermocouple probe, a USB interface cable, and Windows software.

It is designed for outdoor applications such as profiling exhaust gas temperatures of vehicles including tractors, buses, and trucks. The waterproof enclosure lets the system be deployed in wet or exposed locations, while the remote Type K thermocouple reaches high-temperature points away from the protected logger body.

Operating Conditions & Performance

The system logs on two channels. The internal channel covers -40 to 80°C (-40 to 176°F) with a calibrated accuracy of ±0.25°C (±0.45°F) and a resolution of 0.1°C (0.18°F). The remote Type K thermocouple channel covers -270 to 1070°C (-454 to 1958°F) with an accuracy of ±2.0°C (24 AWG wire) and a resolution of 0.1°C.

Thermocouple type: K, with automatic cold junction compensation based on the internal channel.
Maximum thermocouple resistance: 100 Ω.
Memory: 500,000 readings (software configurable memory wrap); 250,000 readings in multiple start/stop mode or trigger setting mode.
Reading rate: 1 reading every second to 1 every 24 hours.
Operating (ambient) temperature: -20 to 80°C (-4 to 176°F).
Humidity: 0 to 100% RH non-condensing.
Power: 3.6V lithium battery (included), user replaceable.

The remote probe connects through a Female subminiature (SMP) connector and measures 153 mm (6") long by 3.2 mm (1/8") in diameter. Data is stored in non-volatile solid state memory, and start modes include immediate start, delay start up to 18 months, and multiple pushbutton start/stop. The complete kit weighs 425 g (15 oz) and carries CE, with an optional NIST calibration certificate.

Note: use of the stainless steel braided thermocouple may allow water to wick in through the cable and cause damage to the data logger.

Configuration Options

The series is supplied as a single, fully assembled system configuration, the OM-CP-ETR101A-KIT. Every kit provides the same waterproof NEMA 4 (IP65) enclosure, Type K remote probe, dual-channel logging, and USB software workflow, so there are no differing logger grades within the series.

The only ordering choice is certification: the system can be supplied with a NIST calibration certificate as the OM-CP-ETR101A-KIT-CERT. Field serviceability is supported through defined replacement parts — the OM-CP-BAT105 replacement 3.6V lithium battery, the TJ36-CASS-18U-6-SMPW-M spare Type K thermocouple, the OM-CP-WATERBOX101A replacement enclosure, and the SSLK-18-14 compression fitting.

Key Product Differences

The model lineup and its supporting order items are:

OM-CP-ETR101A-KIT — temperature data logging system with waterproof enclosure.
OM-CP-ETR101A-KIT-CERT — temperature data logging system with waterproof enclosure and NIST calibration certificate.
OM-CP-BAT105 — replacement 3.6V lithium battery.
TJ36-CASS-18U-6-SMPW-M — spare Type K thermocouple for the data logger.
SSLK-18-14 — 316SS compression fitting for the (1/8") diameter thermocouple probe.
OM-CP-WATERBOX101A — replacement weatherproof NEMA 4 (IP65) enclosure for the data logger.
OM-CP-WATERBOX101A-KIT — maintenance kit for the OM-CP-WATERBOX101A.