RD5100-Series

Universal Input 10 in (250 mm) Hybrid Chart Recorder

High Speed Scanning at 36 Points/Sec and High-Speed Recording
High Accuracy of 0.05%
Various Industrial Values Can be Measured at the Same Time with Selectable Ranges
Superior Ease of Operation

See Product Overview

RD5100-Series

From ^€ 9.011,60

Shop Models

3 Variations available

See all series options below

Data Sheet

Product Overview

Accuracy ± 0.05 %
Accuracy Detail Thermocouple K: ±0.05% ±0.5°C (±20 mV, ±40 mV), ±0.05% ±1°C (±80 mV), E: ±0.05% ±0.7°C (±20 mV, ±40 mV), ±0.05% ±1°C (±80 mV), J: ±0.05% ±0.7°C (±20 mV, ±40 mV), ±0.05% ±1°C (±80 mV), T: ±0.05% ±0.7°C (±20 Mv), R,B: ±0.05% ±1°C (±20 Mv), U,L: ±0.05% ±1°C, W-WRe26, PrRh40-PtRh20, NiMo-Ni: ±0.1% ±1°C, N: ±0.1% ±0.1°C, Platinel II: ±0.1% ±0.1°C (±20 Mv), ±0.1% ±1°C (±40 mV, ±80 mV), RTD: ±0.05% ±0.3°C, DC Voltage: ±0.05% ±1 digit
Alarm Note Alarm Types: High limit, low limit, Alarm Setting Method: Individual setting for each point four levels/ channels
Battery life up to 5 yr
Battery Size and Type Li-ion
Chart Length 20000 mm
Chart Note Fan-fold type; overall width 318 mm (12.5"), total length 20 m (65.6'); effective recording width 250 mm (10") (analog recording)
Chart Speed 1 to 1,500 mm/h
Chart Width 250 mm
CMRR 130 dB
Common Mode Voltage 30 Vac
Cutout Dimensions 388 x 248 mm
Dielectric Strength Between Primary Terminals and Protective Conductor Terminals: 1 minute at 1500 Vac, Between Secondary Terminals and Protective Conductor Terminals:1 minute at 500 Vac, Between Primary Terminals and Secondary Terminals: 1 minute at 1500 Vac
Display Note Color LCD panel RGB (640 x 240 dot), Size: 149.8 W x 57.4 mm H, Setting Display: Common to digital display Display Contents: Digital display, Channel Display: One-point/multiple points continuous/sequential indication change, Display Measuring Value of Each Channel: One-point/multiple points continuous/sequential indication change, Clock Display: Hour/Minute/ Second/Tag/Unit. Alarm Display: Occurrence CH No, data is displayed in red when alarm occurs
Display Type LCD
Electrical Connection Note Terminal Board: Detachable type, removable for wire connection
Height 260 mm
Input Note Input Correction: Zero/span correction and shift correction for each channel
Input Resistance 1 MΩ
Insulation Resistance Between Primary Terminals and Protective Conductor Terminals:20MΩ or more at 500 Vdc, Between Secondary Terminals and Protective Conductor Terminals: 20MΩ or more at 500 Vdc, Between Primary Terminals and Secondary Terminals: 20MΩ or more at 500 Vdc
LED Indicators Record On: Lights during recording; LED, Key Lock: Lights during key lock, Alarm: Lights during alarm activated; LED, Chart End: Lights just before record ending, Fail: Lights during unit abnormal time
Length 300 mm
Loop Resistance, Max Thermocouple Inputs, DC Voltage Input (10 mV): 500Ω or less (without burnout), DC Voltage Input (Except 10 mV): 100Ω or less Resistance, Thermometer Inputs: 10Ω or less/ line, three lines are common, Pt100, JPt100
Materials ABS, Soda glass, Steel
Measurement Range Note Thermocouple: K: Reference Range: ±20 mV: -200 to 500°C, ±40 mV: -200 to 900°C, ±80 mV: -200 to 1370°C, E: Reference Range: ±20 mV: - -200 to 250°C, ±40 mV: -200 to 500°C, ±80 mV: -200 to 900°C, J : Reference Range: ±20 mV: - -200 to 350°C, ±40 mV: -200 to 700°C, ±80 mV: -200 to 1200°C, T: Reference Range: ±20 mV: - -200 to 400°C, R: Reference Range: ±20 mV: 0 to 1760°C, B: Reference Range: ±20 mV: 0 to 1300°C, N : Reference Range: ±20 mV: 0 to 600°C, ±40 mV: 0 to 1000°C, ±80 mV: 0 to 1300°C, W-WRe26: Reference Range: ±80 mV: 0 to 2315°C, W-WRe26: Reference Range: ±80 mV: 0 to 2315°C, PtRh20-PrRh40: Reference Range: ±20 mV: 0 to 1888°C, U : Reference Range: ±20 mV: -200 to 350°C, ±40 mV: -200 to 600°C, L : Reference Range: ±20 mV: -200 to 350°C, ±40 mV: -200 to 700°C, ±80 mV: -200 to 900°C, Nimo-Ni: Reference Range: ±80 mV: -50 to 1310°C, Platinel II: Reference Range: ±20 mV: 0 to 500°C, ±80 mV: 0 to 950°C, 0 to 1395°C RTD: Reference Range: 50Ω: -50 to 50°C , 100Ω: -100 to 130°C, 200Ω: -200 to 250°C, 300Ω: -200 to 550°C Voltage: ±10 mV, ±20 mV, ±40 mV, ±80 mV, ±1.5 V, ±2.5 V, ±5 V, ±10 V
Measurement Type Thermocouple, RTD, Voltage
Mounting Panel Mount
NMRR 50 dB
Operating Environment Reference Operating Condition: Ambient Temperature/Humidity Range: 21 to 25 °C (70 to 77°F), 45 to 65% RH,Power Voltage: 90 to 264V,Power Frequency: 50/60Hz ±2%,Attitude: Forward/Backward/left/right within 3°,Warm-Up Time: 1 hour or longer; Normal Operating Condition: Ambient Temperature/Humidity ,Range: 0 to 40 °C (32 to 104°F), 20 to 80% RH,Power Voltage: 90 to 264V,Power Frequency: 50/60Hz ±2%,Attitude: Forward/backward/left/right within 3°
Operating Temperature, Max 40 °C
Operating Temperature, Min 0 °C
Power Consumption 100 VA
Recording Color Analog Recording: Red, Purple-Red, Orange, Brown, Green, Yellow-Green, Blue-Green, Purple, Purple-Blue, black, Digital Recording and Logging: Black
Recording Note Recording System: Raster scan system, 10-color wire dot printing; Compensation: Independent setting of zero spans are available, Operation: Record On/Off: Recording operation ON/OFF*, Data Print: Printing measuring data*, Feed: Fast-forwarding chart paper
Relative Humidity 20 to 80% RH
Resolution Input: 1/40,000; Display: Thermocouple, RTD: 0.1°C, DC Voltage: 1 µV(±10 mV, ±20 mV), 10 µV(±40 mV, ±80 mV), 100 µV(±1.25V, ±2.5V), 1 mV(±5V, ±10V)
RTD Type 100 Ω pt or Jpt sensor; 3-wire Pt100
Sampling Rate 0.1 sec/channel
Sensor Break Detection Thermocouple Burn-Out: Select with/without burnout for each input
Series ID RD5100-Series
Storage Temperature, Max 60 °C
Storage Temperature, Min -20 °C
Supply Power Note Power Voltage: 90 to 264V, Power Frequency: 50/60Hz ±2%
Supply Power Type AC
Supply Voltage 100 to 240 Vac
Switch Rating 3 A @ 100 to 240 Vac
Switch Rating Note 100 to 240 Vac, 3 A resistance load
Switch Type SPST NO
Temperature Drift 0.1%/10°C
Temperature Measurement Range K: -200 to 1370°C, E: -200 to 900°C, J: -200 to 1200°C, T: -200 to 400°C, R: 0 to 1760°C, B: 0 to 1300°C, N: 0 to 1300°C, W-WRe26: 0 to 2315°C, B: 0 to 1888°C, L: -200 to 900°C, Nimo-Ni: -50 to 1310°C, Platinel II: 0 to 1395°C, RTD: -200 to 550°C
Thermocouple Type J, K, T, E, N, R, S, U, B, G, L, P, NiMo-Ni, PrRh40-PtRh20
Transportation and Storage Details Transportation Condition: Ambient Temperature/Humidity ,Range: -20 to 60°C (-4 to 140°F), 5 to 90%RH (no dew condensation),Vibration: 10 to 60 Hz, 4.9 m (16')/ S2 (0.5G or less),Impact: 392 m (1.3')/S2 (approx. 40G or less); Storage Condition: Ambient Temperature: -20 to 60°C (-4 to 140°F), 5 to 90% RH (no dew condensation),
Voltage Measurement Range ± 10 mV, ± 20 mV, ± 40 mV, ± 80 mV, ± 1.5 V, ± 2.5 V, ± 5 V, ± 10 V
Weight 15 kg
Width 400 mm

Supported Applications

The Omega RD5100 series is a universal-input hybrid chart recorder with a 250 mm (10") recording width, combining multi-color analog trace printing with digital recording and logging. Universal inputs accept DC voltage, a wide selection of thermocouples, and RTDs, so one recorder can capture many industrial process values simultaneously with individually selectable ranges.

With high-speed scanning of 36 points/sec, high accuracy, a USB engineering port, and built-in communication interfaces, the series suits process monitoring, plant data acquisition, and quality records where both a permanent paper chart and networked data are needed. Simple operational keys and interactive setup make it approachable for instrumentation, installation, and maintenance staff.

Operating Conditions & Performance

Measurement accuracy is ±0.05% of reading ±1 digit for DC voltage and most thermocouple and RTD inputs, and the scan rate is 0.1 sec/channel. Display resolution reaches 0.1 °C (32 °F) for temperature and 1 µV for the finest voltage range.

DC voltage inputs span from -10.0 to 10.0 mV up to -10.0 to 10.0V, while thermocouple ranges are broad, for example -200 to 500 °C (-328 to 932 °F), -200 to 900 °C (-328 to 1652 °F), and -200 to 1370 °C (-328 to 2498 °F). RTD inputs support Pt100 and JP100 elements.

Power supply: 100 to 240 Vac, 50/60 Hz.
Operating temperature: 0 to 40 °C (32 to 104 °F); storage -20 to 60 °C (-4 to 140 °F).
Humidity: 20 to 80% RH in operation and 5 to 90% RH for transport and storage without dew condensation.
Communications: RJ45 Ethernet (10BASE-T/100BASE-T), RS422A/RS485 with MODBUS, and USB.
Construction: ABS resin door frame, soda glass front panel, and steel back case; detachable, removable terminal blocks.

The recorder measures 400 x 260 x 300 mm and withstands vibration from 10 to 60 Hz. It carries ISO 9001 and ISO 9002 corporate quality certification.

Configuration Options

All RD5100 models share the 250 mm (10") chart width, universal inputs, 10-color analog dot printing, and digital logging. Models differ by measurement point count, the number of alarm outputs, and whether a communication interface is fitted.

Point Count

The base models provide 12 points on the RD5110, 24 points on the RD5120, and 36 points on the RD5130, letting the same recorder scale from a handful of channels up to dense multi-channel logging.

Alarm Options

Higher-numbered models in each group add alarm outputs; for example the RD5111 adds 12 alarms and the RD5112 adds 24 alarms to a 12-point recorder, using mechanical relay outputs.

Communication Interface

Models carrying the COMM suffix include the communication interface, adding RS422A or RS485 plus Ethernet, which is also required for chart-end and fail relay outputs.

Key Product Differences

A model number is built from the RD5100 base with digits that set the point count, alarm count, and communication option. The 12-point group runs RD5110, RD5111, and RD5112; the 24-point group runs RD5120, RD5121, and RD5122; and the 36-point group runs RD5130, RD5131, RD5132, and RD5133.

Communication-equipped versions are offered across the lineup, such as: