Skip to search Skip to main content Skip to navigation

Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.

LVU2700-Series

Two-Wire Ultrasonic Level Transmitter

  • 4 Measurement Ranges from 3 to 10 m (9.8 to 32.8')
  • Auto Adaptive Filters Enable Plug and Play Operation
  • Fast and Easy Configuration Via Free Software Download and USB Adaptor
  • Narrow 5 or 7.6 cm (2 or 3') Beam Width and Short 10 or 20 cm (4 or 8') Dead Band
LVU2700-Series
From  834,11
Two-Wire Ultrasonic Level Transmitter LVU2700-Series LVU2700-Series
loading all models
Product Overview
  • Accuracy ± 0.2 %
  • Cable Type Insulated Shielded
  • Configuration USB PC Windows®USB 2.0 Memory: Non-volatile. The level sensor is configurable via our free PC software download and USB adaptor. The sensors are offered with and without USB connectors. Connectors can be used to configure any compatible level product. Download your free copy
  • Data Interface USB
  • Electrical Output 4 to 20 mA
  • Enclosure Ratings IP65, NEMA Type 4X
  • Height 5.5 in
  • Insulation Polyurethane
  • Length 5.2 in
  • Loop Resistance 500 Ω @ 24 Vdc
  • Materials FKM, Fluoroelastomer, Polycarbonate, Polyvinylidene, Fluoride
  • Media Compatibility Alkaline solutions, Dilute Acids, Hydraulic Oil, Light Oil, Oil, Solvents, Water, Water-based fluids
  • Memory Non - Volatile
  • Number of Wires 2
  • Operating Pressure, Max 30 psi
  • Operating Temperature, Max 60 °C
  • Operating Temperature, Min -35 °C
  • Output Signal Current
  • Process Temperature, Max 60 °C
  • Process Temperature, Min -20 °C
  • Signal fail-safe 4 mA, 20 mA, 21 mA, 22 mA or hold last
  • Signal invert 4 to 20 mA or 20 to 4 mA
  • Temperature Compensation Automatic
  • Width 4.1 in
OMEGA’s LVU2700 ultrasonic level transmitter provides continuous level measurement up to 10 m (32.8') with a 4 to 20 mA signal output, and is configured via free software and a USB adaptor. This non-contact liquid level sensor is ideally suited for corrosive, ultra-pure, sticky or dirty liquids, and is broadly selected for bulk storage, day tank, lift stations and process tank level applications.
en-NL
en_NL
Save Configuration