Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
PT100-CY82-CYW4-CY100
Cryogenic Platinum RTD Temperature Sensor
- Platinum Resistance Sensors for Cryogenic Measurements
- 4-Wire stainless steel probe
(Band 4 Silicon Diode Sensor) - Special Low Thermal Conductivity
Extension Wire for CY7 Series Diodes - Special Low Thermal Conductivity
Extension Wire for CY7 Series Diodes
PT100-CY82-CYW4-CY100
From
€
465,48
Product Overview
- Electrical Connection Stripped Leads
- Insulation Tetrafluoroethylene (TFE)
- Current, Max 0.5 mA
- Current, Max Note Higher measurement currents can be applied as long as self heating does not change the measurement value more than the needed measurement accuracy. But should not exceed 2mA for 1002 and 0.5mA for 10002.
- Nominal Resistance 100 Ω
- Process Temperature, Max 600 °C
- Recommended Current 0.3 mA
- Sensor Diameter 1.8 mm
- Sensor Length 12.1 mm
- Temperature Sensor Type RTD
Typical connection for Cryogenic sensors such as the CY7 series. The connection points (A) are made close to the sensor in the case of 4-lead measurement, and near or at the instrumentation for a 2-lead measurement. Generally, the 4-lead connection is preferred.
PDFs & Manuals
