DP25B-S-230

Click and hold to zoom

Output Signal

Current, Voltage N/A Current, Isolated Voltage

Control Output

N/A Relay

Supply Voltage

230 Vac 115 Vac 10 to 32 Vdc

Power Consumption

11 W 9.5 W

Input Type

Strain Voltage, Current

$ 561,90 / each

Item# DP25B-S-230

Added to Your Shopping Basket

In Stock

Lead Time (If not in stock): 8 weeks

Brand
Accuracy	± 0.02 %
Analog-to-Digital Technique	Dual slope
Approvals	CE, EMC 2014/30/EU
CMRR	120 dB
Control Output	N/A
Cutout Dimensions	1.772 x 3.622 in
Display Note	4-digit, 9-segment, 21 mm (0.83") red, amber or green LED (programmable)
Display Type	LED
Form factor	1/8 DIN
Height	1.89 in
Impedance Input	100 MΩ for 100 mV or ± 50 mV range; 1 MΩ for 10V or ± 5V range; 5 Ω for 20 mA current input
Input Range Note	0 to 100 mV, ± 50 mV, 0 to 10V, ± 5V, 0 to 20 mA, 4 to 20 mA
Input Type	Strain
Internal Resolution	15 bit
Isolation	Dielectric strength to 2500V transient per 3 mm spacing based on EN 61010 for 260 Vrms or Vdc
Length	6 in
Materials	Polycarbonate
Max Error Strain/Process	± 0.03%
Measurement Type	Current, Voltage
Mounting	Panel
NMRR	60 dB
Number of Digits	4
Number of Inputs	1
Operating Temperature, Max	50 °C
Operating Temperature, Min	0 °C
Output Signal	Current, Voltage
Polarity	Automatic
Power Consumption	11 W
Protection	240 Vrms max for voltage input ranges; 200 mA for current ranges
Reading Rate	3/sec
Relative Humidity	90% @ 40°C non-condensing
Sampling Rate	3 Hz (3 updates/second)
Sensor Excitation	24 Vdc @ 25 mA or 12V @ 50 mA; 10V @ 120 mA or 5V @ 60 mA
Span Temperature Coefficient	± 50 ppm/°C
Step Response	2 s
Storage Temperature, Max	85 °C
Storage Temperature, Min	-40 °C
Supply Power Note	240 Vrms overvoltage protection
Supply Power Type	AC
Supply Voltage	230 Vac
Warm Up Time	30 min
Weight	36 g
Width	3.78 in
Country of Origin	Mexico
See All Specs Show Less

PDFs & Manuals

Compliance