Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
Series-OP
Stainless Steel Orifice Plate Flowmeter, 1/2 to 24 in, Built-in Gaskets
- Mounted with standard flanges
- Standard "corner tap" configuration
- Corrosion free material
- Simplified installation
- Built in metering taps (1/4" female NPT STD)
- Proven through a wide range of applications for accuracy and energy efficiency
- Assures long term reliability and accuracy
Series-OP
From
€
4.517,66
Product Overview
- Applications Fluid Measurement and Control
- Head Loss 1 - Beta ratio² (eg: 1-0.72 = 1-0.49 = 51% of the d.p.)
- Installation Standard Flange, Any rating (orifice flanges not required)
- Media Compatibility Air, Water
- Operating Temperature, Min -50 °F
- Measurement Pressure Type Gauge
- Process Connection Size 1/4 in
- Process Connection Type NPT Female
- Straight Run Requirements 10 Diameters Upstream, 5 Diameters Downstream
The Series OP Orifice Plate Flowmeter is a complete orifice plate flow metering package. It incorporates a stainless steel orifice plate with a unique holder or carrier ring containing metering taps and integral gaskets. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. Installation is accomplished simply by slipping the unit between standard flanges (orifice flanges are not required). The Series OP is available in line sizes from 1/2" to 24" and can be used with compatible liquids and gases.
Product Applications
- Fluid flow rates in building water lines
- Boiler feedwater
- Cooling water
- Combustion or compressed air
- Steam flow
PDFs & Manuals
