Deutschland 07056-9398-0 | Internationale Rufnummer ++49 (0) 7056-9398-0 | Willkommen auf unserer neuen Website! Haben Sie einen Fehler oder ein Problem entdeckt? Bitte melden Sie es hier.
DPG-110-Series
Manomètre numérique à pression alimenté en boucle DC en acier inoxydable
Stainless Steel DC Loop Powered Digital Pressure Gauge
Modelle auf Lager
- Intelligent Two-Wire System 4 to 20 mA Working Mode, 4-Digits 0.56' Digital LED Display
- Full Digital Push-Button Calibration for Zero and Full Scale, No Potentiometers, Low-Temperature Drift
- Reinforced Anti-Jamming Design is Suitable for the Electromagnetic Environment and Harsh Industrial Environments
- IP65
DPG-110-Series
Von
€
337,23
Modelle auf Lager
Produktübersicht
- Burst Pressure 4x Full Scale
- Calibration Press ▼for 5 seconds for zero calibration.Press ▲ for 5 seconds for full scale calibration
- Display Type 4 Digit LED
- Electrical Output 4 to 20 mA
- Enclosure Ratings IP65
- Height 106 mm
- Length 48 mm
- Number of Digits 4
- Operating Temperature, Max 80 °C
- Operating Temperature, Min -30 °C
- Outer Diameter 82 mm
- Output Signal Current
- Process Connection Size 1/4 in
- Process Connection Type NPT Male
- Proof Pressure 200% Full Scale
- Relative Humidity ≤90%
- Series ID DPG-110 Series
- Stability ≤0.2% FS/year
- Supply Power Type Loop Powered
- Supply Voltage 12 to 30 Vdc
- Wiring/Connector Table RED: +24VDC, Black: Ground
Supported Applications
The Omega DPG-110 Series is a DC Loop Powered Digital Pressure Gauge designed for on-site installation in industrial environments. The product overview identifies use cases across hydropower, water, petroleum, chemical, mechanical, and hydraulic industries.
Operating Conditions & Performance
The series utilizes a high-precision piezo-resistive pressure sensor with digital calibration to achieve specified accuracy levels:
- Gauge Pressure >5psi: ±0.25%
- All other ranges (Absolute, Compound Absolute, Compound Gauge, Vacuum): ±0.5% FS
The measuring range spans 0 - 20MPa with an overload pressure capacity of 150%-200%. Stability is rated at ≤0.2% FS per year. The unit operates within an ambient temperature range of -30°C ~ 80°C and supports humidity levels up to ≤90%. Wetted materials are specified as SS316.
Configuration Options
The DPG-110 Series is configured for loop-powered operation with the following documented capabilities:
- Power Supply: 12-30VDC (Loop Powered)
- Output Signal: 4-20mA interface
- Display: 4-digit LED display with a 0.56" digit size
- Housing & Protection: IP65 rated outlet port connector; anti-jamming design suitable for electromagnetic and harsh industrial environments.
- Process Connection: 1/4 NPT
- Sensor Core: Ceramic pressure sensor core
The series supports multiple pressure types, including Absolute (A) and Gauge (G), as indicated by the "Pressure Type" specification of A/G. Calibration is performed via digital controls: pressing ▼ for 5 seconds initiates zero calibration, while pressing ▲ for 5 seconds performs full scale calibration.
Key Product Differences
The series includes multiple model variants distinguished by their pressure range and type codes in the part number. Available configurations include:
- Gauge Pressure Models: Identified with a "G" suffix (e.g., DPG110-005G, DPG110-030G).
- Absolute Pressure Models: Identified with an "A" suffix (e.g., DPG110-015A, DPG110-100A).
- Vacuum/Compound Models: Variants such as DPG110-V100G indicate vacuum or compound capabilities.
The physical dimensions for the series are consistent across variants: 62 mm diameter, 120 mm height, and 48 mm depth. Wiring is configured with RED for +24VDC (within the 12-30VDC range) and Black for Ground.
Zubehör
Amortisseurs de pression pour se protéger contre les variations de pression
Von C$27.12
0 Auf Lager