Italia 800 906 907 | Internazionale +39 022 333 1521 | Benvenuti sul nostro nuovo sito web. Avete riscontrato un problema o un bug? Segnalatelo qui.
SCH-Series
Resistenza a cartuccia in acciaio inox 0,13-1,25 in OD 1-36 in lunghezza
Stainless Steel Cartridge Heater 0.13-1.25 in OD 1-36 in LongEsta pieza no está disponible temporalmente. Por favor, consulte el CSS-CSH como reemplazo sugerido.
- Vaina de acero inoxidable 304 para una excelente conductividad térmica
- Temperaturas de la vaina de hasta 677°C (1250°F)
- Diámetros entre 1/8 in y 1 1/4 in
- Longitudes de 1 in a 36 in (2,5 a 91 cm)
SCH-Series
Da
Panoramica del Prodotto
- Conexión eléctrica Cables pelados
- Materiales del cable Fibra de vidrio
- ID de serie SCH-Series
- Material de la funda Acero inoxidable 304
- Temperatura máxima de la funda 677 °C
Supported Applications
The Omega SCH series consists of stainless steel cartridge heaters designed to provide maximum wattage in limited spaces. The product overview identifies specific applications for this heater, including packaging, rubber molding, form fill and sealing, platen heating, HVAC compressors, die casting, hot melt adhesives, food manufacturing, and extrusion.
Operating Conditions & Performance
The SCH series features a 304 Stainless Steel sheath selected for uniform heat distribution and good thermal conductivity. The documented maximum sheath temperature is 677°C (1250°F). Operating voltage options are listed as 120VAC or 240 VAC.
Performance ranges across the series include:
- Diameter Range: 0.125 to 1.25 in (1/8 to 1 1/4 in)
- Length Range: 1.0 to 36.0 inches
- Wattage Range: 10 to 1200 W
The series is offered with high- and low-density options.
Configuration Options
Model numbers follow the format: SCH - Diameter - Length - Wattage - Termination - Lead Length - Voltage. The series supports a wide configuration envelope for mounting and electrical connections.
Diameter Options:
- 0125 (1/8 in)
- 0187 (3/16 in)
- 0250 (1/4 in)
- 0375 (3/8 in)
- 0500 (1/2 in)
- 0625 (5/8 in)
- 0750 (3/4 in)
- 1000 (1 in)
- 1250 (1 1/4 in)
Termination Types:
- N: Stripped leads
- B: Ceramic bead insulation
- BL: Ceramic bead and leads
- C1B: Straight armored cable, stainless steel
- C2B: Right-angle armored cable, stainless steel
- R1A: Right angle leads, copper elbow
- W: Straight wire braided leads
- M2A: Potted and sealed, fiberglass wires externally connected
- M2E: Potted and sealed, fiberglass wires internally connected
- W1A: Right-angle braided leads, cement potting, no lead wire and disc
- W1B: Right angle braided leads, cement potting, with lead wire and disc
- C3B: Right angle armored cable, cement potting and silicone varnish with lead end disc. Stainless steel cable
- R2B: Right angle leads, cement potting, welded lead end disc
- R3: Angled sheath extension (cement potting only)
- GL: Ground lead sheath
- M2C: High temperature epoxy potting, PFA wires internally connected
Lead Wire and Voltage:
- Standard Lead Length is 12 inches; longer lengths are available.
- Lead wire material is Fiberglass Insulated Lead Wire.
- Voltage codes: 1 (120 Volts AC), 2 (240 Volts AC).
A variety of cold-end terminations, mounting and threading options are available for maximum versatility. Non-standard wattage options are available on request.
Key Product Differences
The SCH series is defined by the 304 Stainless Steel sheath material. Distinctions between variants are established through specific diameter codes (e.g., 0125 to 1250), length increments, wattage ratings up to 1200 W, and termination styles ranging from stripped leads to armored cables and potted configurations.
PDF & Manuali