Netherlands 07077 03815 | International +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
SRFR-SRFG
Silicone Rubber Fiberglass Flexible Heater 450 °F Max
Models In Stock
- Lightweight,Thin, Flexible
- Available in 2.5, 5 and 10 W/in2
- -56°C(-70°F) to 232°C (450°F) Operating Temperature
- Etched Foil and Wire Wound Design
SRFR-SRFG
From
€
31,04
Models In Stock
Product Overview
- Diameter 0 in
- Dielectric Strength 1250 Vac
- Element Shape Rectangular
- Heater Material Polyimide
- Heater Thickness 0.07 in
- Heater Thickness Note 0.030 to 0.070", except at lead wire exit
- Lead Length 305 mm
- Lead Length Note 305 mm (12") PFA insulated
- Operating Temperature, Min -56 °C
- Series ID SRFR-SRFG
OMEGALUX® silicone rubber fiberglass insulated flexible heaters can improve heat transfer and speed warm-ups where controlled heating is required in confined areas. Two circuit designs are available: etched foil or wire wound. Heaters with etched foil designed elements are available where the length or width dimension is less than 12"(305 mm). All other heaters where both the length and the width dimensions exceed 12" (305 mm) use the wire-wound element design. Effect of power density: gentle warming is best done with 2.5 W/in2. A good all purpose unit is the 5 W/in2. Rapid warm-up and high temperature are achieved with the 10 W/in2; however, temperature must be controlled as the safe maximum operating temperature limit of 450 °F (232 °C) may be exceeded.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.
