RH-Combo-Room-Thermistor

Relative Luftfeuchtigkeit Raum mit Thermistorsensor

Umidità relativa ambiente con sensore termistore

Humidification
Dehumidification
Monitoring Indoor Space Humidity
Clean Rooms
Hospitals
Process Control
Laboratories
Museums
Schools
Office Buildings
Data Centers
ESD (Anti-Static) Control

Produktübersicht anzeigen

Von

Modelle einkaufen

0 Variationen verfügbar

Alle Serienoptionen unten anzeigen

Datenblatt

Produktübersicht

Electrical Connection Screw Terminal
Enclosure Material ABS Plastic
Filter Hydrophobic Filter
Height 4.5 in
Length 2.75 in
Current, Max 8 mA
Measurement Type Humidity
Operating Temperature, Max 60 °C
Operating Temperature, Min 1.5 °C
Output Detail 0-5 VDC: 12 - 40 VDC / 18 - 28 VAC
Relative Humidity 0 to 95%
Relative Humidity Accuracy ± 2% RH
Relative Humidity Sensor Type Capacitive with Hydrophobic Filter
Repeatability 0.5% RH,± 0.05°C
Response Time 20 Seconds Typical
Sensitivity 0.1% RH
Series ID RH-Combo-Room-Thermistor
Stability RH Stability: Less than 2% drift / 5 years,Platinum RTD Stability: +/-0.03% after 1000 Hours @ 572°F (300°C)
Storage Temperature, Max 65 °C
Storage Temperature, Min -40 °C
Supply Power Type DC
Supply Voltage 24 Vdc
Tightening Torque 4.43 to 5.31 lb-in (0.5 to 0.6 Nm)
Weight 19.17 lb
Width 1.12 in
Wire Gauge 26 to 16 AWG

Supported Applications

This series supports humidification, dehumidification, indoor space humidity monitoring, process control, laboratories, museums, schools, office buildings, and data centers.

Operating Conditions & Performance

A thermoset polymer capacitive sensing element and hydrophobic filter improve moisture resistance. The multilayer construction resists dust, dirt, oils, and common environmental chemicals.

Configuration Options

On-board DIP switches allow output signal selection, and the sensors can be powered from AC or DC sources. Temperature sensor configurations are available.