Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
FMA-4107
Added to Your Shopping Basket
Configuration complete.
Please add to basket to keep it or exit the configuration
Please add to basket to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 1 % |
| Accuracy Detail | ± 1% of FS at calibration temperature and pressure |
| Altitude Sensitivity | Deviation of up to 1% from stated accuracy, after re-zeroing |
| Calibration | NIST 10-Point Certificate |
| Data Interface | RS232 |
| Display Type | None |
| Electrical Output | 4 to 20 mA, 0 to 5 Vdc |
| Enclosure Ratings | Inst. Level II/Poll. Degree II (IEC 60664) |
| GrossWeightValue | 1.86 |
| Humidity Range | Up to 70% |
| Leak Rate Under Vacuum | less than 10^⁻9 cc He/s |
| Materials, Wetted | 316 Stainless Steel, Aluminum, Brass, FKM |
| Media Compatibility | Clean dry air / inert gas, HVAC / room air, Inert / non-reactive gases, Oxygen |
| Operating Pressure, Max | 500 psi |
| Operating Pressure, Min | 0 psi |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 5 °C |
| Output Detail | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) |
| Output Signal | Current, Voltage |
| Power Consumption | 2.4 W |
| Pressure Coefficient | 0.01% FS/psi |
| Pressure Drop, Max | 0.18 psi |
| Process Connection Size | 1/4 in |
| Process Connection Type | Compression Fitting |
| Repeatability | ± 0.15% |
| Response Time | 2 sec |
| Response Time Note | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow |
| Series ID | FMA4000-Series |
| Supply Power Note | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise |
| Supply Voltage | 11 to 26 Vdc |
| Switch Rating | 30 Vdc, 1A |
| Switch Type | SPDT NO/NC, Selectable |
| Temperature Coefficient | 0.15% FS/°C |
| Turndown Ratio | 50:1 |
| Volumetric Flow Rate, Max | 200 SCCM |
| Volumetric Flow Rate, Min | 4 SCCM |
| Country of Origin | United States |
| See All Specs | |
PDFs & Manuals
