Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
TC-NPT
Pipe Plug Thermocouple Probes with NPT Fitting and Lead Wire
- Rugged 304 SS design with strain relief spring
- Single or Dual thermocouple elements
- Fiberglass leads protected with steel overbraiding
- Choice of J, K,T, or E thermocouple types
Can't find the right model?
Use our custom configurator to fine tune your product
Product Overview
- Additional Features 2 Dual Elements
- Insulation Fiberglass with Stainless Steel Overbraid
- Molded Transition Temperature, Max 480 °C
- Molded Transition Temperature, Min 0 °C
- Number of Connectors N/A
- Measurement Pressure, Max 2500 psi
- Probe Length 0.5 in
- Probe Type Pipe Plug Thermocouple Probes
- Process Connection Type NPT Male
- Process Temperature, Min 0 °C
- Sheath Material 304 Stainless Steel
- Temperature Sensor Type Thermocouple
- Transition Joint Temperature, Max 480 °C
- Transition Joint Temperature, Min 0 °C
- Wire Type Stranded
PIPE PLUG TTHERMOCOUPLE PROBES
These high pressure thermocouple plug sensors are available with single or dual element thermocouples, and ideal for vessel applications, pressurized containers and applications requiring mounted NPT security. The 304SS sheath has a 6.4mm (1/4") dia. that extends 1/2" from the end of the 1/4 or 1/8NPT pipe plug. Other length sheaths are available. The thermocouple-grade lead wires are stranded 20 AWG, fiberglass insulated, and stainless steel overbraided with stripped leads. Connectors are attached on request. Junctions are grounded or ungrounded for a pressure rating of up to 2500 psi. Exposed junctions are available for air or gas temperature measurements at ambient pressures. To tighten mounting threads, there is a hex section that is 22mm (.56") across flats that are 5.8mm (.23") wide.
View the Thermocouple Accuracy and Color Code charts
These high pressure thermocouple plug sensors are available with single or dual element thermocouples, and ideal for vessel applications, pressurized containers and applications requiring mounted NPT security. The 304SS sheath has a 6.4mm (1/4") dia. that extends 1/2" from the end of the 1/4 or 1/8NPT pipe plug. Other length sheaths are available. The thermocouple-grade lead wires are stranded 20 AWG, fiberglass insulated, and stainless steel overbraided with stripped leads. Connectors are attached on request. Junctions are grounded or ungrounded for a pressure rating of up to 2500 psi. Exposed junctions are available for air or gas temperature measurements at ambient pressures. To tighten mounting threads, there is a hex section that is 22mm (.56") across flats that are 5.8mm (.23") wide.
View the Thermocouple Accuracy and Color Code charts
PDFs & Manuals
