Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
FMG90B-Series
OEM Lightweight and Compact Design Electromagnetic Flow Meter
Models In Stock
- Magnetic Flow Meter with No Moving Parts or Obstructions
- Independent to Changes of Temperature, Pressure, Viscosity
- Lightweight and Compact Design
- PVDF and 316L Wetted Parts
- Fast Response (<100 ms)
- See Accessories for Cables and Power Supplies
FMG90B-Series
From
€
1.058,68
Models In Stock
Product Overview
- Accuracy ± 0.7 %
- Accuracy Detail ± 0.7 % of reading ± 0.3 % of range
- Cable Length 10 m
- Conductivity > 20 µS/cm
- Electrical Connection M12 4 pin Female
- Enclosure Ratings IP65
- Flow Indication LED Green
- Flow Indication Note LED Green, Flow proportional flashing
- Media Compatibility Conductive liquids, Corrosive chemicals / acids / bases, Saltwater / brines
- Number of Outputs 1
- Operating Pressure, Max 145 psi
- Operating Temperature, Max 140 °F
- Operating Temperature, Min 41 °F
- Output Detail 0.5 to 10 V
- Power Consumption max 3.6 W
- Process Temperature, Max 140 °F
- Process Temperature, Min 14 °F
- Repeatability ± 1%
- Response Time < 100 ms
- Series ID FMG90B-Series
- Storage Temperature, Max 140 °F
- Storage Temperature, Min 5 °F
- Supply Power Note 12 to 24 Vdc(± 10 %)
- Supply Power Type DC
- Supply Voltage 12 to 24 Vdc
- Weight 0 lb
Supported Applications
The Omega FMG90B Series is a magnetic inductive flow sensor designed for measuring water and electrically conductive fluids. The device operates without moving parts and requires liquids with a minimum conductivity of 20 µS/cm. It must not be used as a safety component.
Operating Conditions & Performance
The series supports inner diameters from 0.12 in to 0.98 in, with an example range of 0.66 - 13.2 GPM for specific configurations. The maximum process temperature is 140°F. Pressure ratings are defined as Max 145 psi at 68°F and Max 116 psi at 104°F.
Electrical requirements include a power supply of 12...24 VDC ±10%. The output signal is provided via Pulse output (Push-Pull) with a pulse rate of 1,500 pulses/gal. A green LED indicator may blink irregularly if the measuring tube is empty or partially filled, or if fluid conductivity is too low.
Configuration Options
The FMG90B Series offers configurable wetted materials and process connections to accommodate different installation needs.
- Wetted Materials: PTFE lining, EPDM liner, or 316L Stainless Steel are available as model options.
- Process Connections: Variants include NPT and BSP threaded fittings (depicted visually in documentation).
- Electrical Connection: M12x1 coupling socket is standard, with connection cables featuring a molded M12x1 coupling socket available as an option.
- Housing: The device features a black and blue plastic housing.
The model number guide follows the format FMG9.B-<Inner Diameter>, with example code 0220 representing a 0.87 in inner diameter.
Key Product Differences
Variants within the series are distinguished by size codes (e.g., FMG915B, FMG920B, FMG93B, FMG96B, FMG98B), wetted material designators (SS for Stainless Steel, HC likely indicating a specific liner configuration based on variant naming patterns), and connection types. The suffixes IO, PO, and VO denote different output or interface configurations paired with NPT or BSP process connections.
PDFs & Manuals
