Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
FMA6703
Multi Parameter Mass Flowmeter
Choose a Variant
Burst Pressure
Volumetric Flow Rate, Max
Added to Your Shopping Basket
Configuration complete.
Please add to basket to keep it or exit the configuration
Please add to basket to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 1 % |
| Accuracy Detail | 0°C to 50°C and 5 to 100 psia (34.5 - 689.5 kPa): ± 1% of full scale (F.S.) |
| Additional Features 1 | 2 SPDT 1A Relay, Multi-parameter Display |
| Altitude Sensitivity | Incremental deviation of up to 1% from stated accuracy, after re-zeroing |
| Burst Pressure | 200 psi Maximum |
| Calibration | NIST 10-Point Certificate |
| Circuit Protection | Reverse polarity, Current Limit, Resettable Fuse |
| Data Interface | RS485 |
| Data Interface Note | The digital interface operates via RS485 (optional RS232 is available) |
| Display Note | 128 x 64 graphic LCD with backlight (up to 8 lines of text). User selectable backlight saver. |
| Display Type | LCD |
| Electrical Output | 4 to 20 mA, 0 to 5 Vdc, 0 to 10 Vdc |
| Enclosure Ratings | Inst. Level II/Poll. Degree II (IEC 60664) |
| GrossWeightValue | 0.15 |
| Humidity Range | Up to 70% |
| Leak Rate Under Vacuum | less than 10^⁻9 cc He/s |
| Materials, Wetted | 316 Stainless Steel, 416 Stainless Steel, FKM |
| Media Compatibility | Clean dry air / inert gas, HVAC / room air, Inert / non-reactive gases, Oxygen |
| Operating Pressure, Max | 100 psi |
| Operating Pressure, Min | 0 psi |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | -10 °C |
| Output Detail | Linear 0-5 Vdc (3000 ohms min load impedance); Linear 0-10Vdc (6000 ohms min impedance); Linear 4-20 mA (500 ohms maximum loop resistance). Maximum noise 20mV peak to peak (for 0-5 Vdc output). |
| Output Signal | Current, Voltage |
| Pressure Accuracy | ± 1 % |
| Pressure Coefficient | 0.01% FS/psi |
| Pressure Drop, Max | 0.04 psi |
| Process Connection Size | 1/4 in |
| Process Connection Type | Compression Fitting |
| Process Temperature, Max | 50 °C |
| Process Temperature, Min | 0 °C |
| Repeatability | ± 0.15% |
| Response Time | 300 ms |
| Response Time Note | 300ms time constant; approximately 1 second to within ± 2% of set flow rate for 25% to 100% of full scale flow. |
| Series ID | FMA6000-Series |
| Spec Sheet QR URL | https://www.dwyeromega.com/en-us/multi-parameter-mass-flow-meter-with-flow-totalizer/FMA6000-Series/p/FMA6703?guid=701a700000ulrduaaq&utm_source=spec-sheet&utm_medium=qr-code&utm_campaign=prd-sku-spec-sheet&utm_content=auto-generated-sku-level-spec-sheet |
| Supply Power Note | May be configured for three different options: Bipolar ± 15Vdc (± 200 mA maximum); Unipolar +12Vdc (300 mA maximum); Unipolar +24Vdc (250 mA maximum); Circuit boards have built-in polarity reversal protection. Resettable fuses provide power input protection |
| Supply Voltage | Bipolar ± 15Vdc, Unipolar 12Vdc to 24Vdc |
| Temperature Accuracy | ± 1 °C |
| Temperature Coefficient | 0.15% FS/°C |
| Volumetric Flow Rate, Max | 50 SCCM |
| Volumetric Flow Rate, Min | 1 SCCM |
| Weight | 2.2 lb |
| Country of Origin | United States |
| See All Specs | |
PDFs & Manuals
Accessories
cables
Replacement cable 25 pin D-conn with 1.8 m (6 ft) wire, branch to power supply
€ 102,35 / each
0 In Stock