Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
BBS-BBP-RLNC-TOOL
High Temperature Heater Wire Terminals and Busbars
- Crimping Tool (CT-HT) : Crimps lugs onto 10 through 22 AWG solid or stranded wire
- Bus Bars (BBS or BBP): 600°C (1110°F) Maximum wire temperature
- Bus Bar Insulation (BBINS): Porcelain hi-temp insulation
- Flexible Metal Armor (THE-0043): For abrasion and flexing protection
BBS-BBP-RLNC-TOOL
From
€
21,29
Product Overview
- Use with Heater Hook-up Wire
This product category includes bus bars, bus bar insulation, ring terminals, and more! Please refer to bullet points and spec sheet to verify item selection before purchasing.
Bus BarsHigh-temperature wire and bus bars are recommended for connections to heater terminals and for runs in heated zones. When ambient temperature exceeds the maximum allowed for insulated wire, use a bus bare wire or a bar with porcelain insulators. Current-carrying capacities should be carefully noted. A bus bar is solid or perforated to facilitate wiring, especially when terminals are in line. The perforated bus bar has 11/32 x 7/32"" slots on 7/16"" centers. When connecting elements with a bus bar, provide expansion loops between elements. Bus bars can be used in multiples for higher amperage capacity (approx. 33-1/2% per bus bar) than listed to the right. Specify the number of feet of bus bar required for your application.
PDFs & Manuals
