Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
Model-F7-MLK2
Customizable 1/2 Station Level Switch Kit, 316 SS, Adjustable Stem 36 in
- Fully customizable kit allows the configuration of stem length (up to 36″), float spacing and actuation points for tailored level switching
- Constructed in rugged 316 stainless steel with Buna-N floats—built for aggressive liquids, oils and high-pressure systems
- Supports 1 or 2-station level monitoring with SPST switch selectable NO/NC rated to 750 psi and -40 °F to 275 °F
- Supplied with all components (floats, tubes, unions, end fitting, mounting plug) for quick assembly and installation
Product Overview
- Applications Chemicals, Oil
- Cable Material N/A
- Electrical Connection Pigtail Leads
- Materials, Wetted 316 Stainless Steel
- Media Compatibility Clean process / cooling water, Compatible Liquids, Oils / lubricants, Organic solvents
- Mounting Orientation Horizontal with downward pointing index
- Operating Temperature, Max 275 °F
- Operating Temperature, Min -40 °F
- Measurement Pressure Type Gauge
- Process Connection Size 1/8 in
- Process Connection Type NPT Male
- Proof Pressure Up to 750 psi
- Series ID Model-F7-MLK2
- Specific Gravity, Min 0.75
- Stem Length 36 in
- Switch Rating 30 VA: 0.14 A @ 220 Vac
- Switch Type SPST NO/NC
- Tubing Outer Diameter 45659 in
- Weight 3.3 lb
- Wire Gauge 18 AWG
Supported Applications
The Dwyer F7-MLK2 Multi-Level Switch Kit provides the components necessary for designing and fabricating a customizable 1 or 2 station level switch. The series is constructed of 316 SS, making it suitable for chemicals, corrosive liquids, oils, and high-pressure applications involving compatible liquids.
Operating Conditions & Performance
The F7-MLK2 operates within a process temperature range of -40 to 275°F (-40 to 135°C) with pressure limits up to 750 psi (52 bar). The switch mechanism is rated for liquids with a minimum specific gravity of 0.75 and supports mounting orientations up to 30° angle from vertical.
Electrical performance includes an SPST output selectable as Normally Open (NO) or Normally Closed (NC), with electrical ratings of 20 VA: 0.8A @ 240 VAC, 0.17A @ 120 VAC, and 0.3A @ 30 VDC.
Configuration Options
The kit allows users to customize the stem length (maximum 36"), actuation points, distance between floats, and lead wire lengths during fabrication. The F7-MLK2 includes two level stations with floats (switch, tube, and float) along with necessary assembly components.
- Wetted Materials: Float/Stem constructed of 316 SS
- Process Connection: 2" male NPT pipe plug
- Tube Dimensions: 1/2" OD tube diameter with a maximum stem length of 36" (91 cm)
- Included Components: Two level stations, two extension tubes (10" / 254 mm), three tube unions, one tube connector, one end fitting, and one mounting plug
- Electrical Connections: 18 AWG x 60" (152 cm) wire leads
- Weight: 3.3 lb (1.6 kg)
Key Product Differences
The F7-MLK2 is a single model kit designed for custom assembly rather than pre-configured variants. The primary variation capability lies in the user-defined configuration of stem length and float spacing within the documented maximums.
PDFs & Manuals
