Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
CDCN-961-Controller
Conductivity, Resistivity, or TDS Controller
- Monitors conductivity, resistivity and TDS in process solutions and water applications.
- Menu-Driven Programming
- NEMA 4X (IP65) Protection
- Programmable High/Low, and Alarm Relays
CDCN-961-Controller
From
€
1.644,09
Product Overview
- Accuracy ± 1 %
- Cable Length 5 m
- Calibration Note Line Resistance Compensation: 0.0 to 20.0 Ω
- Cell Constant K = 0.01, 0.1, 1, 10, Conductivity Electrode: K=1.0
- Conductivity Measurement 0.000 to 3.000, 30.00, 300.0 μS/cm
- Cutout Dimensions 93.5 x 93.5 mm
- Data Interface RS485
- Diameter 136 mm
- Display Type LCD
- EMC Standard EN 50081-1, EN 50082-1
- Enclosure Ratings IP65, NEMA Type 4X
- Frequency 1 to 999 hours 1 to 999 seconds(Frequency of Cleaning Time)
- Height 108 mm
- Impedance 600 Ω
- Materials Graphite
- Measurement Range Note Conductivity: 0.000 to 3.000, 30.00, 300.0 μS/cm Resistivity: 0.3 to 30.0 MΩcm TDS: 0.000 to 3.000, 30.00, 300.0 ppm, Test Range: 0 to 50.0 mS/cm
- Number of Relays 3
- Operating Humidity 10 to 95% RH
- Operating Temperature, Max 50 °C
- Operating Temperature, Min -10 °C
- Output Detail 4 to 20 mA/600 Ω
- Process Temperature, Max -0.5 °C
- Process Temperature, Min 130 °C
- Relay Note 3 SPST/250V 1A, Control Hysteresis Band: 0.1 to 10% FS
- Resistivity Measurement Range 0.3 to 30.0 MΩcm
- Resolution 0.001/0.01/0.1 μS/cm
- Temperature Accuracy ± 0.5 °C
- Temperature Resolution 0.1 °C
- Temperature Sensor Type 1000 Ω RTD
- Weight 1650 g
- Width 100 mm
The CDCN-961 conductance, resistance or total dissolved solids (TDS) controller is designed for inline monitoring of process solutions and water applications. The CDCN-961 has simple menu driven programming for easy setup. Available relays can be programmed for control, alarm or as a calibration reminder. The transmitter output is also programmable from the keypad eliminating the need for potentiometer or dip-switch settings. The calibration function automatically recognizes the buffer solution resulting in a simple and straight forward system calibration.
PDFs & Manuals
