Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
FDT500-Series
Battery and DC Powered Flange Mount Ultrasonic Flow Meter
- Economical Ultrasonic Flow Meter for Water Service
- Battery Powered
- Displays Flow Rate and Total
- 4 to 20 mA Current output standard (DC Power required)
FDT500-Series
From
€
3.326,82
Product Overview
- Accuracy ± 2 %
- Accuracy Detail ±2% of reading; ±5% below minimum transition rate
- Calibration Option 3 POINT NIST
- Certifications CE
- Display Note 7-segment, 8-digit, single-line LCD
- Display Type LCD
- Enclosure Ratings IP68
- Form factor 150 ANSI Flange
- Materials Cast Iron, ABS
- Materials, Wetted cast iron
- Measurement Type Transit Time
- Number of Digits 8
- Number of Outputs 1
- Measurement Pressure, Max 230 psi
- Process Temperature, Max 50 °C
- Process Temperature, Min 0 °C
The FDT500 Series comprises advanced-technology water flow meters. This series uses transit time ultrasonic technology in which the signal is transmitted and received alternately between 2 flow sensors and the "time of flight" determines the flow rate. The battery-powered transmitter comes in the users choice of an integrally mounted display or a remote mount version. Applications include both commercial and consumable water measurement. Long-term stability and a wide measurement range make it possible not only to measure water consumption, but also to monitor systems for water leakage. Because the FDT500 Series has no moving parts, system pressure loss is minimal and filtration is not required. Display flow rate or total at the push of a button. Installation is aided by 150-lb ANSI flanges in sizes from 2 to 8" or 32 to 200 DN.
PDFs & Manuals
