Valves

The SV6000 Series 2-way, normally closed solenoid valves are pilot operated brass body with FKM seal material.

The SV4000 Series 2-way hot water and steam solenoid valves are internally piloted. They feature brass and 316 stainless steel construction, and PTFE seal material.

Two-way solenoid valves for most industrial applications. It has two ports, an inlet and an outlet. A normally closed valve does not pass fluid unless it is energized.

The SV-3500 Series 2-way zero differential solenoid valves are internally piloted valves featuring Brass construction and NBR and PA seal material ideal for neutral media.

Barstock needle valve for isolating instruments from liquids or gases, with fine threading and a large seat for tight shutoff. Suitable for corrosives.

SV170 Series 2-way, 316 SS solenoid valves have a temperature range of -14 to 280°F and the FKM O-ring make these valves ideal for many aggressive liquids and gases.

The SV281 through SV287 Series valves are 2-way, pilot-operated, anti-waterhammer, and are normally closed. These valves are designed to reduce or control waterhammer.

SV3200 Series 2-way solenoid valves are direct-acting valves featuring stainless steel construction and PTFE seal material.

The SV241 and SV242 can be used for liquids or gases. The most common application for these 3-way valves is the control of single-acting cylinders or spring-return actuators.

The economical PV100 Series combines a solenoid valve and electronics that provides an analog proportional control of gases

The FSV10 Series proportioning valves with a pulsed driver electronic solenoid can precisely control the flow of a wide variety of gases and liquids

SV-3321 2-way solenoid valve is a high pressure direct acting valve featuring brass construction and PTFE seal material.