Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
PRG98A
Air Pressure Regulator
- Miniature Precision Air Regulator
- High Resolution Adjustment of Set Pressure
- Highly Accurate Air Pressure Regulation in a Small Package
- Compact and Lightweight
Product Overview
- Diameter 1.38 in
- Exhaust Capacity, Max 7 SCFM
- Flow Rate Note 10 SCFM @ 100 psi inlet
- Height 3.88 in
- Materials Aluminum,Chromate,Epoxy,Nitrile Rubber,Steel,Brass,Stainless Steel
- Media Compatibility HVAC / room air
- Mounting Pipe, panel, through body, bracket
- Operating Temperature, Max 71 °C
- Operating Temperature, Min -18 °C
- Output Pressure, Min 0 psi
- Measurement Pressure Type Gauge
- Process Connection Size 1/16 in
- Process Connection Type NPT Female
- Repeatability 0.3% of span
- Sensitivity 0.25 inH2O
- Series ID PRG98A
- Supply Pressure, Max 150 psi
- Supply Pressure Sensitivity 0.6 psi
- Volumetric Flow Rate, Max 10 SCFM
- Width 1.38 in
Supported Applications
The PRG98A is a miniature air pressure regulator designed for pneumatic service only. It provides the highest level of regulation accuracy and repeatability available in a compact, lightweight housing, making it ideal for applications that require precise pressure control and substantial flow capacity under variable operating conditions and in limited space.
- Regulated air supply for strain-gage, transducer, microprocessor and test-equipment circuits and other pneumatic systems.
- The 1/16-27 NPT 'IN' and 'OUT' ports carry the working air, while optional 10-32 UNF-2B ports allow downstream pressure monitoring.
- A filter of 40 micron minimum should be installed upstream to keep foreign material from affecting performance.
The regulator is a relieving type and must not be relied upon as an overpressure safety device, and the unit is not designed for human applications.
Operating Conditions & Performance
The PRG98A accepts a maximum supply pressure of 10 bar and operates across temperature limits of -18 to 71°C. Its diecast aluminum alloy body carries a chromate and epoxy paint finish, with nitrile elastomers and zinc-plated steel trim on the wetted path.
- Repeatability: 0.3% of span, with high-resolution adjustment of set pressure.
- Flow capacity: 10 SCFM @ 100 psi inlet, with an exhaust capacity of 7 SCFM.
- Supply pressure effect: 0.5 psi for 100 psi change.
- Sensitivity: 0.25 inH₂O.
- Air consumption: 6 SCFM maximum at 150 psi supply.
- Ports: 1/16 - 27 NPT, with optional 10-32 UNF-2B ports.
- Mounting: pipe, panel, through body or optional bracket.
The regulator measures 35.1 W x 35.1 D x 98.5 mm H and weighs 0.16 kg (0.35 lbs).
Configuration Options
Models in the PRG98A range are distinguished by their adjustable output pressure range, so the choice of variant sets the span over which set pressure can be dialed in. All variants share the same housing, port sizes, repeatability and supply-pressure rating.
- PRG98A-30 covers an output range of 0 to 30 psi (0 to 2.1 bar) for low-pressure control.
- PRG98A-60 covers 0 to 60 psi (0 to 4.1 bar) for mid-range service.
- PRG98A-120 extends the output range up to 0 to 6.9 bar for higher-pressure work.
Key Product Differences
The model number follows the guide PRG98A - <OUTPUT PRESSURE RANGE>, where the suffix indicates the adjustable output pressure range.
- PRG98A-30 — output pressure range 0 to 30 psi (0 to 2.1 bar).
- PRG98A-60 — output pressure range 0 to 60 psi (0 to 4.1 bar).
- PRG98A-120 — output pressure range 0 to 6.9 bar.
A compatible pressure gauge, such as the PGU-15B series, can be added with a back-mount fitting for on-system pressure monitoring.
PDFs & Manuals