Netherlands 07077 03815 | International +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
OM-USB-1208HS-Series
Added to Your Shopping Basket
Configuration complete.
Please add to basket to keep it or exit the configuration
Please add to basket to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Analog I/O Note | Analog Input Note: A/D Converter: Successive approximation type;Input Ranges: Software selectable per channel;Differential: ±20V, ±10V, ±5V (the voltage level on each individual AIN input is limited to ±14V) ;Single Ended: ±10V, ±5V, ±2.5V, 0 to 10V ;Number of Channels: 4 differential/8 single-ended (software-selectable) ;Input Configuration: Multiplexed ;Channel Gain Queue: 8 unique consecutive elements, software configurable range for each channel ;Absolute Maximum Input Voltage:CHx IN to GND;Power On: ±25V maximum ;Power Off: ±12V maximum ;Input Impedance: 35 MΩ minimum ;Input Bandwidth (-3 dB):All input ranges, 2 MHz typical ;Input Leakage Current:±250 nA typ ;Input Capacitance: 32 pf typical ;Maximum Working Voltage: (Signal + Common Mode) ±20V: ±14V, ±10V: ±11V, ±5V: ±5.5V;Sampling Rate: 1 S/s to 1 MS/s, software programmable ;Sample Clock Source:Internal A/D clock or AICKI ;Burst Mode: Software-selectable, burst rate = 1 µs ;Throughput ;Software-Paced: 33 to 4000 S/s type, system-dependent ;Hardware-Paced: 1 MS/s maximum ;Resolution: 13-bits ;A/D No Missing Codes (Uncalibrated);Differential (Mode): 13-bits ;Single Ended (Mode): 12-bits ;CMRR: 60 Hz, 74 dB typical ;Analog Ouput Note: D/A Converter: DAC7553 ;Number of Channels:4 independent ;Resolution: 12-bits ;Output Range;Calibrated: ±10V ;Uncalibrated: ±10.2V ;D/A Update Rate ;Software Paced: 33 to 5000 S/s typ, system dependent ;Hardware Paced: 1 MHz maximum (per channel);Sample Clock Source: Internal D/A clock or AOCKI (AO external clock input pin) ;Monotonicity: 12-bits ;Output Current: ±3 mA maximum per channel ;Power Up and Reset State: 0V ;Output Noise: 0.53 mV rms ;Absolute Accuracy: ±0.1% ;Slew Rate: 6.7V/µs typical |
| Configuration Parameters | Edge/Level Trigger Mode, Pull-Up/Down Configuration, User-Configurable Input/Output |
| Data Buffer | 4 kS |
| Data Interface | Ethernet |
| Data Interface Note | USB Device Type: USB 2.0 (full-speed), Device Compatibility: USB 1.1, USB 2.0, USB Cable Length: 3 m (10') maximum;Configuration Method: TracerDAQ Software;Supported Operating System: Microsoft Windows® VISTA/7/8/10 (32-bit and 64-bit) |
| Digital I/O Note | Digital Type: CMOS Number of I/O: 16 Configuration: Each bit may be configured as input (power on default) or output Pull-Up Configuration: The port has 47 kΩ resistors configurable as pull-ups or pull-downs by an internal jumper (default setting is pull-down) Digital I/O Transfer Rate (System Paced): 33 to 8000 port reads/writes or single-bit reads/writes per second typical, system dependent. Input High Voltage: 2.0V minimum 5.5V absolute maximum Input Low Voltage: 0.8V maximum -0.5V absolute minimum, 0V recommended minimum Output High Voltage: 4.4V minimum (IOH = -50 µA), 3.76V minimum (IOH = -24 mA) Output Low Voltage: 0.1V maximum (IOL = 50 µA), 0.44V maximum (IOL = 24 mA) Output Current: ±24 mA maximum per terminal ;Pulse Width: Trigger Pulse Width: 100 ns minimum;Schmitt Trigger Hysteresis: 0.4V to 1.2V |
| Digital Input | Digital: Low = –0.5 Vdc |
| Digital Output | ±3 mA max |
| Electrical Connection | Screw Terminal |
| Height | 35.6 mm |
| Input Capacitance | 32 pf |
| Input Configuration | Connected Software |
| Input Type | Digital |
| Input Voltage Note | Absolute Maximum Input Voltage: CHx IN to GND Power On: ±25V maximum, Power Off: ±12V maximum |
| Length | 127 mm |
| Memory | Non-Volatile |
| Microcontroller | Internal Clock Frequency: 40 MHz |
| Mounting | DIN-Rail or Wall Mount |
| Number of Channels, Input | Analog: 4 Differential / 8 Single-Ended, Digital: 16, Counter: 2 |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Pull-down Resistor | 47 kΩ |
| Pull-up Resistor | 47 kΩ |
| Relative Humidity | 0 to 90% RH non-condensing |
| Sampling Rate | 1 Hz to 1 MHz (1 to 1,000,000 updates/second) |
| Sampling Rate Note | 1 S/s to 1 MS/s, software programmable |
| Series ID | OM-USB-1208HS-Series |
| Slew Rate | 6.7 V/µs |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -40 °C |
| Supply Current | Up to 500 mA |
| Supply Power Note | Operating Modes: Bus-powered, USB 5V supply Supply Current: Total current consumption including 5V, and digital output and analog output currents Suspend Mode: : <2.5 mA , Enumeration: <100 mA, Run Mode: <500 mA Power Consumption Excluding Analog and Digital Outputs: Run Mode: 1.175 W maximum (235 mA input current) Power Available for 5V, AICKO, AOCKO, TMR, Analog Outputs, Digital I/O: Run Mode: 1.325 W maximum +5 V Output Voltage Range:Run Mode: 4.5V minimum, 5.25V maximum, Suspend Mode, Enumeration:0V +5V Output Current (Run Mode, No Other Output Loads): 265 mA maximum (1.325 W) |
| Supply Voltage | 5 Vdc |
| Timer Output | Timer Terminal Name: TMR;Timer Type: PWM output with count, period, delay, and pulse width registers;Output Value: Default state is idle low with pulses high, software selectable output invert;Internal Clock Frequency: 40 MHz;Register Widths: 32-bits;High Pulse Width: 20 ns minimum;Low Pulse Width: 20 ns minimum;Output High Voltage: 4.4V minimum(IOH = -50 µA), 3.76V minimum(IOH = -24 mA);Output Low Voltage: 0.1V maximum (IOL = 50 µA), 0.44V maximum (IOL = 24 mA);Output Current: ±24 mA maximum per pin |
| USB Cable Length | 5 m |
| Voltage Measurement Range | ±20V, ±10V, ±5V, ±2.5V, 0 to 10V, Single Ended, Differential |
| Weight | 160 g |
| Width | 89.9 mm |
| See All Specs | |
PDFs & Manuals
Software & Drivers
