Netherlands 07077 03815 | International +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
OMPBD7-mush1
Added to Your Shopping Basket
Configuration complete.
Please add to basket to keep it or exit the configuration
Please add to basket to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Contact Durability (Back-of-Panel) | 10,000,000 cycles |
| Dielectric Strength, Min | 2500 V/min |
| Insulation Voltage | Ui = 690 V (screw terminal) ;Ui = 300 V (screwless terminal) |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | -25 °C |
| Relative Humidity | 50 to 95% |
| Relative Humidity Note | 50 to 95% RH from 25 to 60°C (77 to 140°F) per: Procedure IV of MIL-STD-810C, Method 507.1 cycling test |
| Source of Light | N/A |
| Storage Temperature Note | -40 to 85°C (short-term storage) |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -40 °C |
| Supply Voltage | N/A |
| Thermal Current | 10 A max |
| Tightening Torque | 0.7 to 0.9 Nm |
| Vibration and Shock | Vibration (Front Panel): Tested at 10 ...2000 Hz, 1.52 mm displacement (peak-to-peak);max/10 G max for 3 hr duration, no damage;Vibration (Back of Panel): 10 to 2000 Hz, 1.52 mm displacement (peak-to-peak) max/10 G max 6 hr;Shock (Back of Panel): Tested at 1/2 cycle sine wave for 11 ms and no damage at 100 G max;Shock (Front of Panel): Tested at 1/2 cycle sine wave for 11 ms; no damage at 100 G |
| Wire Gauge | 18 to 12 AWG |
| Wire Gauge Note | #18 to 12 AWG (0.75 to 2.5 mm2 ) Max (2) #14 AWG or (1) #12 AWG For Screw terminal |
| See All Specs | |
PDFs & Manuals