PR-25AP

-100 °C to 250 °C RTD Air Temperature Probes M12 Connector

Pt100 Wire Wound RTD with Class A Accuracy Standard (Tighter Accuracy Options Available)
Resistance vs. Temperature and Accuracy per IEC 60751
Temperature Range: -100 to 250°C (-148 to 500ºF)
Probe Will Withstand 400 psi (27.6 bar) Differential Pressure Between Airstream and Ambient Conditions

See Product Overview

PR-25AP

From ^€ 201,29

Shop Models

4 Variations available

See all series options below

Data Sheet

Product Overview

Electrical Connection M12 4 pin Female
Nominal Resistance 100 Ω
Number of Wires 4
Probe Diameter 0.25 in
Process Temperature, Max 250 °C
Process Temperature, Min -100 °C
Sheath Material 316L Stainless Steel
Temperature Sensor Type RTD
Wiring/Connector Table 1

Our PR-25AP RTD Air Probe combines the availability of the high accuracy sensor options found in our Ultra-Precise RTD probes with the convenience and reliability of our M12 enabled PR-21 probes. The PR-25AP offers RTD accuracies of Class A, AA (formerly 1/3DIN) and 1/10DIN sensing elements with the ease and reliability of the M12 connection.
The PR-25AP RTD is also designed to provide a barrier to airflow between the air stream and the ambient conditions that has been tested to 400 psi with no leakage. The probe is constructed with a 316L stainless steel housing and sheath for strength and corrosion resistance. For ease of mounting, the PR-25AP is available with the following mounting thread options:

1/2NPT

3/8NPT

1/4NPT

Non-Threaded Housing

The mounting thread options above allow the probes to be used in a wide variety of applications, including:

As stand-alone immersion sensors.

Installed directly into your product or process using an NPT threaded port.

The non-threaded design can be combined with our M12-Handle accessory to convert it for hand-held sensing applications.

Other applications using a variety of available compression fittings or other accessories.

The PR-25AP, like all of our M12 enabled probes, comes standard with a 4-wire, 4-pin, M12 A-Coded plug connector for easy assembly to extension cables. This allows it to be used in any 2, 3 or 4-wire measurement system for maximum flexibility. For 1/10DIN accuracy we highly recommend using a 4-wire measurement to take maximum advantage of the tight accuracy option.
When ordering your PR-25AP sensor, don't forget your extension cable. Omega offers a wide selection of extension cables including over molded PVC, Polyurethane and Silicone cables, as well as customized cables in a variety of materials with optional stainless steel braid or hose for improved mechanical protection, and a wide selection of instrument connections.
Connect your PR-25AP RTD sensor to one or more of Omega's wide variety of in-stock controllers, data loggers, transmitters, hand held thermometers, PLCs, or other measurement & control products to complete your measurement or control system. Omega offers a selection of programmable and fixed range transmitters that can be connected directly to the M12 connection of your PR-25AP sensor. There are also wireless transmitter options available.

PDFs & Manuals

PR-25AP_spec View More

View Less

Compliance