Skip to search Skip to main content Skip to navigation

Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.

PHCN37-Series

1/8 in DIN Panel Mount pH Controller

  • Microprocessor-Based Versatility
  • High and Low Alarm Setpoints
  • Scalable 4 to 20 mA, 0 to 20 mA or 0 to 10 V Output
  • Compact Panel Design
PHCN37-Series
From  790,08
1/8 in DIN Panel Mount pH Controller PHCN37-Series PHCN37-Series
loading all models
Product Overview
  • Accuracy ± 1 mV
  • Additional Features 1 1/8" DIN, ORP, Sensors Sold Separately
  • Calibration Note pH Calibration modes: 2 or 3 point
  • Cutout Dimensions 45 x 92 mm
  • Decimal Selection 3-Position, Autoranging
  • Display Size 13.7 mm (0.54 in)
  • Display Type 4 Digit LED
  • Height 48 mm
  • Impedance Input >10¹² Ω
  • Length 177 mm
  • Measurement Resolution pH: 0.01
  • Number of Relays 2
  • Output Detail 4 to 20 mA, 0 to 20 mA or 0 to 10V (scalable) software selectable
  • pH Accuracy ± 0.03 pH
  • PH Measurement Range 0 to 14.00 pH
  • Process Temperature, Max 0 °C
  • Process Temperature, Min 100 °C
  • Relay Note 2 From "C" on/off relays. Configurable for latched and unlatched by software.
  • Resolution 0.1, 1 mV
  • Sensor-Transducer Connection pH/ORP-BNC; Temperature -Terminal Strip
  • Temperature Resolution 0.1 °C
  • Temperature Sensor Type 100 Ω or 1000 Ω RTD
  • Weight 580 g
  • Width 96 mm
This microprocessor-based family of pH panel mounted controller is designed for a wide variety of environmental monitoring applications. The units features automatic or manual temperature compensation of pH, two 5 amp mechanical relays and a choice of a scalable 4 to 20 mA, or 0 to 20 mA control or recording output or a 0 to 10 V output. For ease of operation all calibration and parameter set points are selectable through the front keypad.The PHCN model can be interfaced with a variety of pH electrodes.
*The ORCN and OPCN models have been discontinued. Please contact our Electronic Engineering department if you are in need of a replacement for these series.*

Accessories

consumables

10.00 pH buffer solution 500 mL (1 pint) bottle
€ 19,34 / each
0 In Stock
4.00 pH buffer solution 500 mL (1 pint) bottle
€ 19,34 / each
1 In Stock
7.00 pH buffer solution 500 mL (1 pint) bottle
€ 19,34 / each
2 In Stock

installation hardware

CABLE ASSEMBLY
€ 149,68 / each
0 In Stock

sensors

Flat Surface In Line pH/ORP Electrodes
€ 249,26 / each
0 In Stock
TEMP COMP PT100 ASSEMBLY (*)
€ 357,77 / each
0 In Stock
en-NL
en_NL
Save Configuration