1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
CNI-AL-Series
1/32, 1/16, and 1/8 DIN Temperature and Process Limit Controller
- CE and UL Rated
- Universal Inputs
- High Accuracy
- 2 Relay Alarm Outputs
Product Overview
- Accuracy ± 0.5 °C
- Accuracy Detail ±0.5°C temperature; 0.03% rdg
- Additional Features 1 Simplified Alarm Menus, Manual Reset
- Control Output 2 SPDT Relays - Form C Relay
- DIN Rail Size 0.0625 mm
- Display Type 4 Digit LED
- Height 48 mm
- Impedance Input 10 MΩ for 100 mV, 1 MΩ for 1 or 10 Vdc
- Input Configuration Front panel configurable
- Input Current 0 to 20 mA
- Input Type Thermocouple, RTD, mA, Voltage
- Lead Resistance, Max 100 Ω
- Length 127 mm
- Number of Inputs 1
- Number of Outputs 2
- Operating Temperature, Max 55 °C
- Operating Temperature, Min 0 °C
- Output Detail SPDT, 250 Vac or 30 Vdc @ 3 A (resistive load) Voltage Excitation: 24 Vdc @ 25 mA (not available with low power option)
- Reading Rate 3/sec
- Relative Humidity 0.9
- Series ID CNI-AL-Series
- Supply Power Note Voltage Input: 0 to 100 mV, 0 to 1V, 0 to 10 Vdc Power: 90 to 240 Vac ±10%, 50 to 400 Hz, 110 to 300 Vdc, equivalent voltage Low Voltage Power Option: 24 Vac, 12 to 36 Vdc; external power source must meet safety agency approvals
- Temperature Sensor Type Thermocouple
- Temperature Stability RTD: 0.04°C/°C,Thermocouple @ 25°C (77°F): 0.05°C/°C, cold junction compensation,Process: 50 ppm/°C
- Width 48 mm
Description
*For our newest line of controllers with Modbus connectivity, expanded ramp and soak programs, universal inputs, and simple PC programming, visit our CNPT_SERIES CNPT Series.*The ultra-compact CNi8C and CNiS8C controllersare similar to the full size i8 in an ultra-compactenclosure. Only 51 mm (2") behind the panel. The i8C/iS8C displaycan be programmed to changecolor between GREEN, AMBER, or RED at any setpoint or alarmpoint. The i8C/iS8C includes the option of bothRS232 and RS485 in 1 instrumentwith the straightforward OMEGA® ASCII protocol. If Modbus is required, we recommend our latest Platinum controllers - CNPT_SERIES CNPT Series.
The i8C comesstandard with your choice of2 control or alarm outputs in almostany combination: solid state relaysrated at 0.5 A @ 120/240 VacForm "C" SPDT relays rated at3 A @ 120/240 Vac pulsed 10 Vdcoutput for use with an external SSRor analog output (0 to 10 Vdc or0 to 20 mA) selectable for control orretransmission of the process value.
The universal temperature andprocess instrument offer a selection of 10 thermocoupletypes as well as 2-, 3- or 4-wireRTDs, process voltage and current.The i8C controller is ideal for use with transmittersand amplified transducers. Built-inexcitation is standard (24 Vdc@ 25 mA). The units handle0 to 20 mA process current andprocess voltage in 3 scales:0 to 100 mV, 0 to 1V, and 0 to 10V.
The strain/process instrument(model iS) meters and controllersmeasure inputs from load cells,pressure transducers, and most anystrain gage sensor. Input rangesinclude 0 to 100 mVdc -100 mVdcto 1 Vdc 0 to 10 Vdc in addition to0 to 20 mA. Excitation for transducersof 5 V and 10 V is standard.
Theenclosure has aNEMA 4 (IP65) rated front bezel and electronics are removable fromthe front panel.
PDFs & Manuals
