1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
DPI-Series
Indicateurs de température, de procédé et de contrainte
1/32, 1/16, 1/8 DIN, Programmable Temperature/Process Meters
Modèles en stock
- Entrées universelles
- Facile à utiliser, simple à configurer
- Haute qualité
- Fonctionnalités puissantes
DPI-Series
À partir de
€
285,82
Modèles en stock
Aperçu du produit
- Conversion A/N Double pente
- Fonctions supplémentaires 1 Écran couleur programmable à 3 couleurs
- Homologations UL, C-UL, UKCA, CE selon 2014/35/UE
- CMRR 120 dB
- Configuration Single-ended
- Action de contrôle Action : inversée (chauffage) ou directe (refroidissement)
- Sortie de commande Relais SPDT ; alarme
- Dimensions de la découpe 45 mm
- Filtre numérique Programmable
- Échelle d'affichage -1999 à 9999
- Type d'affichage LED à 4 chiffres
- Connexion électrique Borne à vis
- Fréquence 50 à 400 Hz
- Impédance d'entrée 10 MΩ pour 100 mV ; 1 MΩ pour 1 ou 10 Vcc
- Courant d'entrée 0 à 20 mA (charge de 5 Ω)
- Isolation Power to Input/Output : 2300 VCA pendant un test de 1 minute Pour l'option alimentation basse tension : 1500 VCA pendant un test de 1 minute Power to Relay/SSR Output : 2300 VCA pendant un test de 1 minute Relay/SSR to Relay/SSR Output : 2300 VCA pendant un test de 1 minute RS232/485 to Input/Output : 500 VCA pendant un test de 1 minute
- Longueur 127 mm
- Points de linéarisation Jusqu'à 10
- NMRR 60 dB
- Nombre d'entrées 1
- Température de fonctionnement, max 55 °C
- Température de fonctionnement, min 0 °C
- Température de fonctionnement Remarque 0 à 55°C (32 à 131°F) 90 % HR sans condensation
- Détails de la sortie Relais : 250 Vac ou 30 Vcc à 3 A (charge résistive) ; configurable pour marche/arrêt, PID et rampe et maintien Sortie 1 : SPDT, peut être configurée comme sortie d’alarme 1 Sortie 2 : SPDT, peut être configurée comme sortie d’alarme 2 SSR : 20 à 265 Vac à 0,05 à 0,5 A (charge résistive) ; continue Impulsion DC : Non isolée ; 10 Vcc à 20 mA Sortie analogique (sortie 1 seulement) : Non isolée, proportionnelle 0 à 10 Vcc ou 0 à 20 mA ; 500 Ω max Retransmission de la sortie 3 Tension et courant analogiques isolés Courant : 10 V max à sortie 20 mA Tension : 20 mA max pour sortie 0 à 10 V
- Polarité Unipolaire
- Taux de lecture 3/sec
- Humidité relative 0,9
- Fréquence d'échantillonnage 3 Hz (3 mises à jour/seconde)
- Remarque sur l'alimentation du capteur/transmetteur 5 Vcc @ 40 mA; 10 Vcc @ 60 mA (Optionnel en remplacement de la communication)
- ID de série DPI-Series
- Réglage de l'amplitude 0,001 à 9999 comptes
- Réponse en échelon 0,7 s pour 99,9 %
- Effets thermiques -1999 à 9999
The OMEGA™ iSeries is a family of microprocessor-based instruments offered in three true DIN sizes with NEMA 4 (IP65) rated front bezels. All of the instruments share the same set-up and configuration menu and method of operation, a tremendous time saver for integration of a large system. The iSeries family includes extremely accurate digital panel meters "DPi" and single loop PID controllers "CNi" that are simple to configure and use, while providing tremendous versatility and a wealth of powerful features. The DPi Series covers a broad selection of transducer and transmitter inputs with 2 input models.
The Universal temperature and process instrument (DPi models) handles 10 common types of thermocouples, multiple RTDs and several process (DC) voltage and current ranges. This model also features built-in excitation, 24 Vdc @ 25 mA. With its wide choice of signal inputs, this model is an excellent choice for measuring or controlling temperature with a thermocouple, RTD, or 4 to 20 mA transmitter. The strain and process instruments (DPiS models) measure inputs from load cells, pressure transducers, and most any strain gage sensor as well as process voltage and current ranges. The DPiS has built-in 5 or 10 Vdc excitation for bridge transducers, 5 Vdc @ 40 mA or 10 Vdc @ 60 mA (any excitation voltage between 5 and 24 Vdc is available by special order). This DPiS model supports 4- and 6-wire bridge communications, ratiometric measurements. The DPiS features fast and easy "in process" calibration/ scaling of the signal inputs to any engineering units. This model also features 10-point linearization which allows the user to linearize the signal input from extremely nonlinear transducers of all kinds. Programmable Color Display The DPi Series are 1/8, 1/16 and 1/32 DIN digital panel meter featuring the big iSeries color-changing display. The digits are twice the size of typical 1/8 DIN panel meters. The iSeries meters feature the only LED displays that can be programmed to change color between GREEN, AMBER, and RED. . Embedded internet and serial communications featuring optional "embedded Internet" (specify "-EIT" option) the iSeries are the first instruments of their kind that connect directly to an Ethernet network and transmit data in standard TCP/ IP packets, or even serve Web pages over a LAN or the Internet. The iSeries are also available with serial communications. With the "-C24" option, the user can select from the pushbutton menu between RS232, RS422, and RS485, with straightforward ASCII commands. If Modbus is required, we recommend our latest Platinum meters - DPPT Series.
The Universal temperature and process instrument (DPi models) handles 10 common types of thermocouples, multiple RTDs and several process (DC) voltage and current ranges. This model also features built-in excitation, 24 Vdc @ 25 mA. With its wide choice of signal inputs, this model is an excellent choice for measuring or controlling temperature with a thermocouple, RTD, or 4 to 20 mA transmitter. The strain and process instruments (DPiS models) measure inputs from load cells, pressure transducers, and most any strain gage sensor as well as process voltage and current ranges. The DPiS has built-in 5 or 10 Vdc excitation for bridge transducers, 5 Vdc @ 40 mA or 10 Vdc @ 60 mA (any excitation voltage between 5 and 24 Vdc is available by special order). This DPiS model supports 4- and 6-wire bridge communications, ratiometric measurements. The DPiS features fast and easy "in process" calibration/ scaling of the signal inputs to any engineering units. This model also features 10-point linearization which allows the user to linearize the signal input from extremely nonlinear transducers of all kinds. Programmable Color Display The DPi Series are 1/8, 1/16 and 1/32 DIN digital panel meter featuring the big iSeries color-changing display. The digits are twice the size of typical 1/8 DIN panel meters. The iSeries meters feature the only LED displays that can be programmed to change color between GREEN, AMBER, and RED. . Embedded internet and serial communications featuring optional "embedded Internet" (specify "-EIT" option) the iSeries are the first instruments of their kind that connect directly to an Ethernet network and transmit data in standard TCP/ IP packets, or even serve Web pages over a LAN or the Internet. The iSeries are also available with serial communications. With the "-C24" option, the user can select from the pushbutton menu between RS232, RS422, and RS485, with straightforward ASCII commands. If Modbus is required, we recommend our latest Platinum meters - DPPT Series.
PDF & Manuels
Logiciels & Pilotes
