Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
PTC-20
1/16 DIN Multi-Programmable LED Timers, 4-Digit Dual Line Display
- 1/16 DIN Cutout
- Three Different Models: Standard, High Performance and Repeat Cycle
- Four-Digit Dual Line Display Indicates Set Value and Time Value
- All Models Offer Multiple Field Programmable Modes for Operation and Time Ranges
Product Overview
- Accuracy ± 0.01 %
- Activation Time 21 ms
- Control Mode Repeat Cycle: Batch stop, batch continue and interval
- Cutout Dimensions 45 x 45 mm
- Display Note Dual-line, 4-digit, 7-segment LED, 8 mm H (0.31")
- Display Type Dual 4 Digit LED
- Enclosure Ratings IP65
- Form factor 1/16 DIN
- Frequency 50/60 Hz
- Height 48 mm
- Humidity Range 5 to 95% RH, non-condensing
- Impedance 10 kΩ
- Inhibit NPN or Dry Contact
- Inputs Start and Reset NPN or dry contact
- Length 85 mm
- Measurement Type Time
- Memory Non-volatile
- Operating Temperature, Max 55 °C
- Operating Temperature, Min 0 °C
- Power Consumption 10 VA
- Resolution Settable for time values in hours/minutes/seconds ranges
- Storage Temperature, Max 90 °C
- Storage Temperature, Min -40 °C
- Supply Power Type AC
- Supply Voltage 90 to 240 Vac
- Timer Range Hours, minutes, seconds; hours, minutes; minutes, seconds
- Weight 100 g
- Width 48 mm
If you are looking to outfit your control panel with timers that have an attractive LED display, consider the new PTC-20 series that deliver functionality at competitive prices.
Designed for you to best fit the correct timer to your application, the PTC-20 series is divided into three separate models. The PTC-21 base unit offers five field-selectable operating modes and time ranges as well as a host of other convenient features. The high performance PTC-23 model offers advanced functions such as dual setpoints and 1 ms resolution. The PTC-22 repeat cycle model provides a repeat cycle (batch stop, batch continue) and interval modes specifically tailored for cyclical operations.
With ultimate simplicity in mind, the PTC-20 series utilizes an intuitive button-per-digit method for setpoint input and easy to follow scroll-thru menus for programming. The dual line display optimizes the interface by indicating both the present time value and the setpoint, while up to 8 annunciator lights provide status. Multi-level security enables shop floor access to be custom tailored to your needs.
Intended for tough industrial conditions, the PTC-20 Series offer a NEMA-4/IP65 rated front panel and a high degree of noise immunity. Choose from models with a 5 amp relay, which can directly drive a load, or solid state outputs for high speed applications.
