Netherlands 07077 03815 | International +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here.
CNP-Series
Added to Your Shopping Basket
Configuration complete.
Please add to basket to keep it or exit the configuration
Please add to basket to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.1 % |
| Accuracy Detail | ±0.1% of input range ±1 LSD (T/C CJC better than 1°C) |
| Additional Features 1 | Low Voltage Power |
| Approvals | CE, UL and ULC recognized |
| Auto/Manual Selectable | From front panel with bumpless transfer |
| Control Characteristics | Enable control ON/OFF selectable from front keypad |
| Control Mode | PID Control, On-off control |
| Control Output | SPDT Relay, Alarm |
| Data Interface | RS485 |
| Data Interface Note | 2-wire RS485, 1200 to 19,200 Baud, Modbus |
| Depth Behind Panel | 100 mm |
| Display Type | 4 Digit LED |
| Enclosure Ratings | IP20, IP66 |
| Front Panel Dimensions | 96 x 48 mm |
| Impedance Input | >10Ω for thermocouple and mV ranges, 47Ω for V ranges and 5Ω for mA ranges |
| Input Type | Thermocouple, RTD, mA, Voltage |
| Input Type Note | Thermocouple J, K, C, R, S, T, B, L, N and PtRh 20% vs PtRh 40% RTD 3 Wire PT100: 50Ω per lead maximum (balanced) |
| Keypad | 4 button operation with LED display and indicators |
| Measurement Type | Current, Temperature, Voltage |
| Number of Control Outputs | 3 |
| Number of Inputs | 1 |
| Operating Temperature, Max | 55 °C |
| Operating Temperature, Min | 0 °C |
| Output Configurations | Up to 3 |
| Output Detail | 1 DC pulse, 2 SPDT 2A relay outputs;Control and Alarm Relays: Contacts SPDT 2 amp resistive at 240 Vac, >500,000 operations Output Configuration: up to 3 possible outputs for control and alarms. Control SSR Driver Outputs: >10 Vdc in 500 minimum drive capability Triac Outputs: 0.01 to 1 amp AC, 20 to 280 Vrms, 47 to 63 Hz Alarm Output: Process high, process low, SP deviation, band, logical or/and; also 1 loop alarm for process control security; process alarms have adjustable hysteresis |
| Output Signal | DC Pulse |
| RTD Type | 100 Ω Pt Sensor |
| Relative Humidity | 20 to 95% |
| Sampling Rate | 4 Hz (4 updates/second) |
| Sampling Rate Note | 4 per second, 14 bit resolution approximately |
| Sensor Break Detection | < 2 seconds (except zero based DC ranges), control O/P's turn off, high alarms activate for T/C and mV ranges, low alarms activate for RTD, mA or V ranges |
| Series ID | CNP-Series |
| Storage Temperature, Max | 80 °C |
| Storage Temperature, Min | -20 °C |
| Supply Power Note | 100 to 240 V, 50/60 Hz, 7.5 VA, 20 to 48 Vac 7.5 VA/22 to 65 Vdc, 5W |
| Supply Power Type | AC |
| Supply Voltage | 100 to 240 Vac |
| Thermocouple Type | None |
| Weight | 0.21 kg |
| See All Specs | |
PDFs & Manuals
