Skip to search Skip to main content Skip to navigation

Need assistance? Call us: 1-800-663-4209

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.
Back To Top

Thermocouple Input Temperature Transmitter w/ Pushbutton Config

The TX13 head mount transmitter is a 2 wire 4-20mA transmitter for thermocouple inputs. Accepts Type K, J, N, E, T, R, S and mV inputs. Pushbutton range configuration.

Compact Modular Signal Conditioner Data Acquisition Systems

The OM5 Series are modular conditioners that allow multiple modules to connect to a backplane with process outputs. TC, DC I/V, RTD, Frequency, Potentiometer, Strain gage

Temperature/RH Conditioner/Transmitter Probe w/ 4 Output Options

HX94B Series conditioners/transmitters measure temperature and relative humidity with 4 process outputs options. SS NEMA 4 (IP65) housing. Duct or wall mount probes.

Dual DIN Rail Temperature Transmitter w/ Programmable Inputs

The TXDIN70 series provide two channel transmitters or isolators with 4-20 or 0-20 mA output. Programmable input types with TXDIN70-DISPLAY accessory (sold separately)

Temperature/Relative Humidity Transmitter w/ Display & Probe

HX93B Series conditioners/transmitters measure temperature and relative humidity with process output options. Models with display, duct mount or wall mount probes.

Handheld Multifunction Calibrator w/ Pressure Modules

The PCL1000 Multifunction Calibrator has excellent accuracy and measures and simulates TCs, RTDs, Ω, Current, Voltage and Frequency. Add-on pressure modules available.

High Speed Temperature and Process Meter, NFC Enabled

OMEGA’s melt pressure indicators also function as transducer power supplies and signal conditioners, OLED graphic display, Universal power.

DIN Rail Thermocouple Input Signal Conditioners | Low Profile

The DRSL-TC Series are isolated or non-isolated thermocouple input signal conditioners. Accepts Type J and Type K TC's. DIP switch selectable ranges, slim housing.

DIN Rail Universal Input Signal Conditioner w/ Slim Housing

The DRSL-U is a universal input conditioner that accepts thermocouple, RTD, resistance, potentiometer, voltage or current input. Configured w/ DRSL-DISPLAY programmer.

DIN Rail Temperature Loop Powered Signal Conditioner

The DRSL-TEMP is an output loop powered temperature signal conditioner. Accepts Type J, Type K, or 2, 3 or 4 wire Pt100 RTD input. Slim housing, high accuracy.

DIN Rail Signal Conditioner Series with Model Specific Input Type

CCT DIN rail conditioners that accept various input signals, such as voltage and current, frequency, temperature (TC and RTD), and provide 0/4 to 20 mA, or 0 to 10 Vdc.

Temperature, Relative Humidity Signal Conditioner with LCD

The HX400 Series Conditioners have a remote probe to measure temperature and relative humidity and output single or dual channel 4-20mA outputs. Models with LCD, SSR output.

Programmable Head Mount Temperature Transmitter for Thermocouples

The TX86 is a universal input for RTD, TC, Ω, POT and mV with 4-20mA output. Field scalable via front panel programmable push buttons. LED display and SSR output.

Modular Signal Conditioner Data Acquisition Systems

OM5 Series modular conditioners allow multiple modules to connect to a backplane with process outputs. TC, DC I/V, RTD, Bipolar voltage input. Single DC power supply

Head Mount Temperature Transmitters with RFID Communications

The TX400 series is a head mount transmitter that accepts RTD and thermocouple inputs depending on model and provides 4-20mA output. RFID requires TX400-RFID Programmer.

2-Wire Programmable Transmitter with Universal Input

The TXUN-ST-FM Series is a 2-wire programmable head mount transmitter with RTD, TC, Ω, or mV Input. FM approved model available (TXUN-FM). Programmable via TXUN-KIT.

2-Wire Transmitter w/ Hart Protocol Enabled | 2 Analog Inputs

The TXUN-HT dual input accepts RTD, TC, O, and Bipolar mV Input with 2 wire 4-20mA output. Hart 5 or Hart 7 protocol. TXUN-KIT programmer required.

DIN Rail Configurable Conditioners with Model Specific Input Type

The DRG-SC Series Conditioners have models with TC, RTD, Pot, Freq., AC/DC Voltage/Current, Strain/Bridge inputs and field configurable outputs from 0-5V, 0-10V, 0-20mA.

DIN Rail Transmitter with RFID Communications

TXDIN400 series transmitters accept thermocouple or RTD input (TX401) or process voltage, current, or resistance (TX402). Configurable via RFID with TX400-RFID accessory.

Searching for your items
en-US
en_IN
Save Configuration