United Kingdom 0800 488 488 | Intl +44 (0) 161 777 6611 | Welcome to our new website, found an issue or bug? Please report it here
LVCN-40-series
LEVEL INDICATOR AND INTERFACE, with NEMA 4X Enclosure
- Indicates Tank Level or Volume and Relay Status
- Enables Relay Set Point Changes in the Field
- Powered Directly by the Attached Sensors
- Repeats Sensor Data with No Programming
LVCN-40-series
From
£
281.22
Product Overview
- Additional Features 1 Classification- General Purpose
- Cable Length 1.8 m
- Cable Material Polyurethane
- Display and Indications Relay on/off
- Display Color Black
- Display Size 9.5 mm (0.37 in)
- Display Type 6 Digit LCD
- Display Type Note LCD, 6-digit with 4 relay indicators Units: Engineering Output: -99999 to 999999 Decimal Point: Fixed
- Enclosure Material Polycarbonate
- Enclosure Ratings IP65, NEMA Type 4
- Input Note LVCN210, LVCN318 or LVCN414 series
- Keypad Three button
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -20 °C
- Series ID LVCN-40-series
- Span Adjustment 0.001 to 9999 counts, programmable
- Wire Gauge 22 AWG
Supported Applications
The Omega LVCN-40 Series is a general-purpose level indicator designed to display tank level or volume in engineering units. It functions as a field-mounted repeater for compatible sensors, showing the measured value and relay status configured on the attached device. The series supports applications requiring monitoring of liquid height or volume where changes to relay set points can be made directly through the field indicator.
The LVCN-40 Series is compatible with:
- LVCN-414 Series level sensors
- LVCN-210 Series level sensors
- LVCN-318 Series level sensors
These sensors must be configured with LVCN-414-SW 6.0 software and updated to V50 firmware or higher.
Operating Conditions & Performance
The indicator operates within an ambient temperature range of F: -4° to 140°, C: -20° to 60°. It is powered by the attached level sensor, with a supply voltage that should never exceed 28 VDC. The device features a NEMA 4 (IP65) enclosure rating when mounted and utilizes a polycarbonate housing.
Performance specifications include:
- Display Output Range: -9999.9 to 99999.9
- Character Height (Resolution): 0.374" (9.5 mm)
- Cable Length: 4' (1.2m) with a maximum separation of up to 4.5m (15') from the sensor.
The enclosure is liquid-resistant but not designed for operation when immersed. The series should not be used within classified hazardous environments, and these products are not designed for human applications.
Configuration Options
The LVCN-40 Series provides a fixed configuration with specific interface and connection capabilities:
- Display Type: LCD, 6-digit with 4 relay indicators showing dot indication for relay status.
- User Interface: Three-button silicon rubber controls for set point adjustments.
- Electrical Connection: 4-conductor, #22 AWG cable with polyurethane jacketing and a 3/4 coarse thread connector type.
- Housing Material: Polycarbonate enclosure designed for panel mount installation.
The indicator repeats the measured value, relay status, and set point configuration of the attached sensor without requiring independent programming. It is certified to CE and RoHS standards under ISO 9001 Certified manufacturing processes.
Key Product Differences
The LVCN-40 Series consists of a single model variant (LVCN-40) within this series bundle. The device identity is defined by its role as an interface indicator for the specified Omega sensor families, with no alternative housing styles or output signal types documented in the source material.
PDFs & Manuals
