1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
HSTH-44000
Hermetically Sealed Thermistor Sensors
Modèles en stock
- Available in 3 Standard Resistance Values: 2252 Ohms, 5000 Ohms or 10,000 Ohms at 25°C.
- Interchangeability: ± 0.1°C Between 0 and 70°C.
- Temperature Range -80 to 150°C (-110 to 302°F)
- Available in Standard Lengths of 40, 80 and 120 Inches (1, 2 and 3 Meters).
HSTH-44000
Depuis
C$
144.97
Modèles en stock
L'aperçu du produit
- Précision ± 0.1 °C (± 0.18 °F)
- Insulation PFA
- Insulation Note 1, 2, or 3 m (40, 80, or 120") of 26 AWG Stranded PFA Insulated and Jacketed Cable with Stripped Leads Standard
- Number of Wires 2
- Probe Type Hermetically Sealed Thermistor Sensors
- Process Temperature, Max 150 °C
- Process Temperature, Min -80 °C
- Temperature Sensor Type Thermistor
- Tip Diameter, Max 0.1 in
- Tip Diameter, Min 0.09 in
- Wire Gauge 26 AWG
- Wire Type Stranded
The HSTH Series Flexible Thermistor Sensors are hermetically sealed at the sensor tip to provide continuous protection from corrosive environments. This unique Thermistor temperature probe design provides a small, flexible, and electrically isolated Thermistor element, suited to a variety of applications. The HSTH Series is available in three resistance values: 2252Ω, 5000Ω and 10000Ω.
If you need higher operating temperatures, see our RTD Version or Thermocouple Version which may be a better fit for your application.
PDF et manuels
Afficher les notes et les avis
Rated 1 out of
5
by
Joe p from
Very disappointing!
Quality control and customer service needs improvement! I ordered 6 and only got 3 that worked. I sent the 3 bad ones back, and after months of waiting for the sensors that I needed months ago, I finally received 2 good ones and 1 bad one. I will not be using Omega again. Very disappointing!!!
Date published: 2020-05-26
Rated 5 out of
5
by
Johnny Linzan from
The item has good price and it came fast
High quality product. Good customer service and friendly people
Date published: 2025-09-23
Rated 5 out of
5
by
CMCC from
Thermistor
Good Quality Sensor. Excellent Drop-In replacement for obsolete part.
Date published: 2024-11-16
Rated 4 out of
5
by
Anonymous from
Precise Temperature Control
Fairly accurate, but tip is delicate and you cannot bend it too much otherwise the internal thermistor breaks.
Date published: 2020-09-29
Rated 1 out of
5
by
Joe p from
Need to improve quality control
This sensor is great when you get one that works. I ordered 6 and 3 didn't work. No prob I contacted Omega and they said send it back and we will send you new ones. After months of waiting they sent me 3 replacement sensors. Only two of those 3 sensors actually worked. I will not be using Omega for my futher needs.
Date published: 2020-05-26
Rated 5 out of
5
by
Loureiro58 from
Great product
Your tech suport is very helpful!
Thank you very much !
Date published: 2017-12-31
Is this a NTC(negative temperature coefficient) thermistor?
Thank you for your email . The HSTH-44031-120 uses a NTC thermistor which
drops in resistance with increase temperature . The Thermistor Resistance vs. Temperature table is found per the attached link
https://www.omega.co.uk/temperature/Z/pdf/z256-257.pdf
Date published: 2020-03-23
what is the diameter of the Item# HSTH-44031-120 probe end? thanks
Product appearance and tip diameter information is available on the Data Sheet (PDF) link on this page. Tip size ranges from 2.3 to 2.5 mm (0.090 to 0.100")
Date published: 2020-04-03
Is it possible to immerse this in a tube of flowing water (diameter of 15 mm) to monitor the temperature of the water? if you know another kind of thermistor that can do this job, I would be grateful if you could provide me with their link. Thank you
Thank you for your inquiry. This can be used to measure water.
Date published: 2024-11-27
What is the accuracy of this sensor?
Thank you for your inquiry. Interchangeability: ±0.1°C Between 0 and 70°C.
Date published: 2025-01-13