검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-CDTC

CO2 센서(온도 및 수요 제어 환기용 설정점 포함)

  • CO2 및 온도 측정을 하나의 트랜스미터로 결합하여 재고를 최소화하고 시간을 절약
  • 내장 온도 센싱으로 공간 내 장치 수 감소
  • 센서 드리프트를 보정하는 자동 기준선 보정(ABC)으로 최소한의 유지보수 필요
  • 현장 선택 가능한 Modbus® 및 BACnet 통신으로 배선 감소
  • 백플레이트 전기 연결로 설치 간소화
Series-CDTC
시작 608,378 원
CO2 센서(온도 및 수요 제어 환기용 설정점 포함) Series-CDTC Series-CDTC
loading all models
제품 개요
  • 응용 분야 HVAC
  • 이산화탄소 정확도 ± 40 ppm + 측정값의 3%
  • 이산화탄소 농도, 최소 0 ppm
  • 이산화탄소 반응 시간 120초 (τ90)
  • 데이터 인터페이스 RS485, Modbus RTU, BACnet MS/TP
  • 측정 유형 이산화탄소, 온도
  • 장착 방향 북미 스타일 벽걸이
  • 작동 온도, 최대 122 °F
  • 최소 작동 온도 32 °F
  • 상대 습도 0~85% RH 비응축
  • 센서 수명 15년
  • 센서 종류 NDIR
  • 시리즈 ID Series-CDTC
  • 전원 유형 AC / DC
  • 공급 전압 10 ~ 30 Vac / 10 ~ 42V dc
  • 스위치 유형 해당 없음
  • 온도 출력 범위 해당 없음
  • 무게 4.4 oz

Supported Applications

The Series CDTC Communicating Carbon Dioxide Detector combines the function of several room sensors into a single, compact housing. Each unit measures carbon dioxide, temperature, and temperature set point with override, making it a practical all-in-one sensor for demand-controlled ventilation in occupied spaces. Unlike the companion CDTA line, the CDTC does not include a humidity sensor.

Because communication is field-selectable between Modbus® and BACnet, the detectors can be daisy chained with only four wires for both power and communication signal, which streamlines wiring in building-automation and retrofit projects. Install away from locations with severe shock or vibration, excessive moisture, or corrosive fumes, and disconnect the power supply before installation to prevent electrical shock and equipment damage.

Operating Conditions & Performance

The CO2 sensor measures either 0 to 2000 or 0 to 5000 PPM depending on model, and the temperature channel measures across 0 to 50°C.

  • CO2 accuracy: ±40 PPM ±3% of reading on the 2000 PPM model and ±50 PPM ±5% of reading on the 5000 PPM model.
  • Temperature accuracy: ±1°C at 25°C.
  • Response time: 2 minutes.
  • Power requirements: 10-42 VDC / 10-30 VAC, with a 1/8 unit device load.
  • Output: 2-wire RS-485, Modbus® RTU or BACnet MS/TP communication protocol.

The sensing elements are an NDIR CO2 sensor with a 15 year life expectancy and a 10KΩ thermistor for temperature. The device operates from 0 to 50°C with an ambient humidity limit of 0 to 85% (non-condensing). It measures 114.30 mm high by 71.12 mm wide by 27.69 mm deep and weighs 4.4 oz (125 g). A 120Ω terminating resistor can be switched in between A[-] and B[+]. Agency approvals are BTL and CE.

Configuration Options

All models share the same communicating platform, four-wire daisy-chain wiring, and set-point-with-override capability; they differ by CO2 measuring range and display option.

  • CO2 range: models are offered for either a 0 to 2000 PPM or a 0 to 5000 PPM span.
  • Display: an on-board LCD version is available to show any of the measured parameters.
  • Set point range: the temperature set point is field adjustable, defaulting to 20°C for the low limit and 35°C for the high limit and spanning from 0°C up to 50°C.

Key Product Differences

The lineup pairs each CO2 range with a display option:

  • CDTC-2N000 — 2000 PPM CO2 detector without display.
  • CDTC-2N000-LCD — 2000 PPM CO2 detector with LCD.
  • CDTC-5N000 — 5000 PPM CO2 detector without display.
  • CDTC-5N000-LCD — 5000 PPM CO2 detector with LCD.

액세서리

accessories

現地校正用200 ppm COおよび2000 ppm CO2ガスを含むガス校正キット(陸送のみ)。
¥154,592 / 各
0 재고 있음

meters/controllers

ミニUSBディスプレイ付きリモートディスプレイ
¥14,699 / 各
0 재고 있음
CDTC-25-NE-000-LCD-COC-FC
가스 농도 범위
하우징
CO2/온도/RH 출력
CDTC 옵션
ko-KR
ko_KR
설정 저장