日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-VBS
コンパクト振動スイッチ RMS監視用、設定点および遅延調整可能
- 簡単なセットアップと操作コンセプト
- 4~20 mA出力
- ソフトウェア不要
- 調整可能なスイッチおよび遅延設定点
製品の概要
- 精度 ± 3 %
- 電気接続 M12 4ピン メス
- 電気出力 0~20 mA
- 電気定格 18から32Vdc
- エンクロージャーの定格 IP67, NEMA タイプ 6
- 周波数 10〜1000 Hz
- 材料 316 ステンレススチール
- 取付方向 位置感応ではない
- 非直線性 スパン値の ±0.25% 未満
- 動作温度(最高) 221 °F
- 動作温度(最低) -22 °F
- プロセス接続サイズ 8 mm
- プロセス接続タイプ メトリック・オス
- 繰り返し精度 < 0.5%
- シリーズID Series-VBS
- スイッチタイプ SPST NO (最大500 mA)
- タイムディレイ 1秒から60秒まで
- 速度、最小 0 mm/s
- 重量 0.25 lb
Supported Applications
The Dwyer Series VBS Compact Vibration Switch is designed to continuously monitor changes in a machine's vibration level. The unit takes real-time RMS (Root Mean Square) vibration input and provides an analog output of velocity, as well as a switching output when an alarm value is exceeded.
Operating Conditions & Performance
The Series VBS operates within an ambient temperature range of -22 to 221°F (-30 to 105°C). The device features an enclosure rating of NEMA 6 (IP67) and is constructed with PBT, PC, FPM, and 316 SS housing materials. Performance specifications include an accuracy of < ±3% and repeatability of < 0.5%. Nonlinearity is specified as < ±0.25% of span.
Power requirements are met by a supply voltage of 18 to 32 VDC. The unit supports mounting in all orientations.
Configuration Options
The series offers two primary measurement ranges configured via specific models:
- VBS-1: Switch output range of 0 to 25 mm/s Vrms.
- VBS-2: Switch output range of 0 to 50 mm/s Vrms.
The Series VBS utilizes two easy set-up dials that adjust the maximum RMS velocity set point and false trip time delay. The switch time delay is adjustable from 1 to 60 seconds (or s). Electrical connectivity is provided via an M12 connector, specifically a 4-pin connection.
Output signals include:
- Analog output: 4 to 20 mA
- Digital switching output: PNP normally open (500 mA max)
The process connection is an M8 connection made of 316 SS. An accessory option, model A-283, provides a 4-wire connection.
Key Product Differences
Differences between the Series VBS models are defined by their measurement and switch output ranges:
- VBS-1 is designated for applications requiring a vibration range of 0 to 25 mm/s Vrms.
- VBS-2 covers the extended range of 0 to 50 mm/s Vrms.
The series carries CE agency approval. The unit weighs 0.25 lb (0.114 kg). Per manufacturer warnings, the Series VBS is not field serviceable; if repair is needed, it should be returned with a Return Goods Authorization number.