検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

HFS-DAQ-series

8差動入力 熱流束センサーデータロガー

  • UL、4つのHFSセンサーからの熱流束および温度の同時測定用に8差動入力チャネル。   
  • USBケーブル接続によるコンピュータベースのユーザーインターフェースおよびデータ記録用の無料ソフトウェア。
  • 特に高インピーダンスセンサー使用時の精度向上のための電流バイアス誤差の自動ゼロ調整。
  •    
HFS-DAQ-series
販売元 ¥ 79,546
8差動入力 熱流束センサーデータロガー HFS-DAQ-series HFS-DAQ-series
loading all models
製品の概要
  • 精度 ± 2 °C (± 3.6 °F)
  • アナログI/Oノート アナログ入力 注:冷接点補償:あり、オンボードサーミスタによる、アナログ-デジタルコンバータタイプ:24ビットデルタシグマ
  • データインターフェース USB
  • 高さ 8.7 mm
  • 入力タイプ 熱電対、熱流束
  • 入力タイプ 備考 熱電対:T
  • 長さ 10.4 mm
  • チャンネル数、入力 アナログ:8 DIFF
  • 出力ノイズ 出力電圧:0.85 µVRMS
  • 抵抗値の分解能 < 1 µV
  • サンプリングレート 3 Hz (3 更新/秒)
  • シリーズID HFS-DAQ-series
  • 電圧測定範囲 ±2.048 V
  • 幅 9.6 mm

Supported Applications

The Omega HFS DAQ is a data acquisition system designed to read and record measurements from HFS heat flux sensors with integrated thermocouples. The instrument supports applications requiring the simultaneous monitoring of small analog DC voltage signals outputted by these specific sensor types.

  • Recording both heat flux and temperature data
  • Data logging via accompanying software that allows users to start/stop recording, toggle viewing plots for different channels, and save runs as .csv files

Operating Conditions & Performance

The HFS DAQ system is engineered with a 24-bit Delta-Sigma Analog-to-Digital Converter. Key performance specifications include an input voltage resolution of < 1 μV and an output voltage noise of 0.85 μVRMS. The device accepts differential inputs within a range of +/- 2.048 Volts.

  • Cold Junction Compensation: Yes, provided by on-board thermistor
  • CJC Thermistor Accuracy: 2 °C absolute accuracy
  • Maximum Sampling Rate: Approximately 3 Hz (dependent on the number of channels/sensors measured simultaneously)

Configuration Options

The series is configured as a low-cost data acquisition system packaged to measure signals from HFS heat flux sensors. The unit features 8 differential input channels, allowing up to 4 complete HFS sensors (each providing both heat flux and temperature) to be connected simultaneously.

  • Computer Interface: USB cable
  • Standard Thermocouple Type: Type-T
  • Overall Package Dimensions: 4.8" x 4.1" x 3.4" (9.6 x 10.4 x 8.7 cm) for the largest system configuration; lower functionality versions may have smaller height dimensions.

Key Product Differences

The HFS DAQ is offered as a single model, part number HFS-DAQ. The datasheet notes that overall package dimensions vary based on included features, with the specified 4.8" x 4.1" x 3.4" (9.6 x 10.4 x 8.7 cm) representing the largest system configuration.

  • Software behavior: The program does not append to the next available file name when a new data run is collected; users must manage filenames manually.
  • Performance note: On older computers, data in plots may be delayed during operation.
ja-JP
ja_JP
設定を保存する