1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
HX80A-Srs-TRH-BP-Sig-Cond
Transmetteurs de température, d’humidité relative, de point de rosée ou de pression barométrique pour montage mural, à distance ou en conduit
Wall, Remote, or Duct Mount Temperature, Relative Humidity, Dew Point, or Barometric Pressure Transmitters
Modèles en stock
- Boîtier en acier inoxydable 316
- Précision de ± 1 % HR
- Précision de la température de ± 0,5°C (1,0°F)
- Haute température [120°C (248°F)]
HX80A-Srs-TRH-BP-Sig-Cond
À partir de
C$
1,784.21
Modèles en stock
Aperçu du produit
- Précision ± 0,5 °C (± 0,9 °F)
- Longueur du câble 1.8 m
- Interface de données RS232
- Remarque sur l'interface de données RS232C (bidirectionnel) vers appareil DTE, 19,2 kilo bauds, 8 bits de données, 1 bit d'arrêt, sans parité
- Filtre Acier inoxydable fritté
- Courant, max 50 mA
- Limites de pression Jusqu'à 690 psi
- Remarque concernant la pression 317 kg (700 lb) (47,6 bar)
- Diamètre de la sonde 19 mm
- Longueur de la sonde 203 mm
- Taille du raccordement au process 3/4 po
- Type de raccordement au process NPT mâle et femelle
- Humidité relative 5 à 95 %
- Précision de l'humidité relative ± 1,0 % HR
- Matériau du capteur Acier inoxydable
- ID de série HX80A-Srs-TRH-BP-Sig-Cond
- Tension d'alimentation 18 à 30 Vcc
- Mesure de la température, max 120 °C
- Mesure de la température, min -20 °C
- Constante de temps <15 sec, dépendant du débit d'air (pour une réponse de 66,6 %)
- Poids 0.9 kg
The HX80A Series is a family of humidity probes that offer a variety of measurement parameters with precision accuracy: relative humidity and temperature, with dew point or pressure. The probe is easily adaptable for most applications via a 3/4 NPT fitting that can be adjusted to any desired position, including high temperature and high pressure conditions. This remote type transmitter comes standard with a 1.8 m (6'') cable and is ideally suited for many different applications such as environmental chambers, compressed air, and industrial applications. Models offer a stainless steel probe with a removable sinter stainless steel filter and RS232 (which allows for reading of data, scaling output, and for HX86A type units, changing the digital display and setting the alarms). All models have 3 outputs, with output 1 scaled for 0 to 100% RH, output 2 scaled for -20 to 120°C (-4 to 248°F), and output 3 determined by the model number. Output 3 for HX85A and HX86A is -60 to 40°C (-76 to 104°F) dew point, for HX85BA and HX86BA is 750 to 1100 mb, and for HX85PA and HX86PA is 0 to 200 psia. RH measurement range is 5 to 95% with an accuracy of ± 1%. temperature accuracy is ± 0.5°C (33°F). HX85A (probe only) models (HX85A, HX85BA, HX85PA) offer 0 to 10V signals on the outputs via a 1.8 m (6'') cable. The HX86A models (HX86A, HX86BA, HX86PA) include a display box attached to the end of the cable from the probe, and offers a 2 line digital display, 2 alarms, three 4 to 20 mA output signals, and an RS232 serial output.
PDF & Manuels
Accessories
accessories
sensors
Module de capteur remplaçable sur site pour HR/température/pression
C$959.55 / each
0 En stock
Afficher les évaluations et les avis
Rated 5 out of
5
by
Dushyant Chaudhari from
Excited with all the functionalities
Looking forward o using the analog output that can be read continuously.
Date published: 2023-04-21
Using Putty , I do get the following by manually entering T , H or D However I do not get any result when I enter P for Pressure ?!
Thank you for your inquiry. You should be using the letter "B" for Barometric Pressure.
Date published: 2021-10-15
Do you have any additional data for time constant vs air flow, and is there maximum allowable flow speed?
Hi Phoenix,
Thank you for the inquiry. Please forward this question to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2022-05-19
Is a longer cable available?
Hi Gg42,
Thank you for the inquiry. Please forward your request to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2024-03-14
Will this unit operate in a low pH environment, pH range 2.0 to 6.0 standard units? Will this unit operate after exposure to a spray water flush of 5 minutes?
Thank you for the inquiry. This unit is designed for non condensing environment only. Air with mist, particulates, or oils are not suitable application for the sensor. Probe will not function in wash down environment.
Best regards
OMEGA
Date published: 2021-04-23
What is the IP rating on the unit and on the probe?
Thank you for the inquiry. Electronics housing is rated IP66. For details on the sensor please forward your question to TEMP@DWYEROMEGA.COM.
Best regards
OMEGA
Date published: 2024-01-23
Does the unit come with a NIST traceable certificate?
Thank you for your inquiry. Unit is supplied with NIST certificate.
Date published: 2023-03-16