España 800 900 532 | Fuera de España +34 911 776 121 | Bienvenido a nuestro nuevo sitio web. ¿Encontró algún problema o error? Por favor, infórmelo aquí.
Volatile-Organic-Compounds
Compuestos Orgánicos Volátiles, 0-1000 ppb, Modbus RS-485
- Monitorización de la calidad del aire
- Purificadores de aire
- Estándar WELL Building
Volatile-Organic-Compounds
Desde
Resumen del Producto
- Aplicaciones Aire y climatización, Construcción y mantenimiento, Monitorización medioambiental
- Rango de medición de CO2 0 a 1000 ppb
- Interfaz de datos Modbus RTU, RS485
- Conexión eléctrica Terminal de tornillo
- Salida eléctrica 4 a 20 mA, 0 a 10 Vcc
- Material del alojamiento Plástico ABS
- Concentración de gas 0 a 1000 ppm
- Resistencia de carga 4-20 mA: 500 Ohmios maximaimo (Predeterminado)
- Opción de construcción de los materiales ninguno
- Rango de medición 0-1000 ppb
- Humedad de funcionamiento 10 a 95 % HR, sin condensación
- Temperatura de operación, máx. 122 °F
- Temperatura de operación mínima 32 °F
- Tiempo de respuesta <5 segundos
- Tipo de sensor Semiconductores de óxido metálico
- ID de serie Volatile-Organic-Compounds
- Temperatura de almacenamiento, máx. 140 °F
- Temperatura de almacenamiento, mínima -4 °F
- Suministrar corriente de alimentación 50 mA
- Tensión de alimentación 16 a 28 VCA, 16 a 35 VCC
- Par de apriete 0,45 lb-in (0,5 Nm) nominal
- Punto de disparo Nota 230 ppb
- Tiempo de calentamiento 15 minutoutos
- Calibre del cable 22 a 16 AWG
Supported Applications
The ACI VOC Series is an indoor air quality (IAQ) sensor designed to measure Total Volatile Organic Compounds (TVOC). The series utilizes a high-performance metal oxide semiconductor sensor to detect contaminants emitted from building materials, furnishings, office equipment, cleansers, and disinfectants. By measuring TVOC levels in the range of 0-1000 ppb (Isobutene), these transmitters communicate data back to Building Automation Systems (BAS) to assist users in adjusting ventilation for proper IAQ maintenance.
Operating Conditions & Performance
The series operates within an ambient temperature range of 32 to 122°F (0 to 50°C) and a humidity rating of 10 to 95% RH, non-condensing. Storage temperatures are specified from -4 to 140°F (-20 to 60°C). The sensor response time is less than 5 seconds, with a warm-up time of 15 minutes required for operation.
Enclosure protection ratings vary by configuration: IP30 for Room and Probe models, and IP65 for Duct models. All units feature ABS Plastic housings rated UL94V-0. The series requires a power supply of 16-28VAC or 16-35VDC with reverse polarity protection.
Configuration Options
The ACI VOC Series offers configurable mounting options, output signals, and interface features to accommodate different installation environments. The series supports the following capabilities:
- Housing Configurations: Room Mount (VOC-R), Duct Mount (VOC-D), and Probe configurations.
- Output Signals: Analog outputs of 4-20 mA (Default) or 0-10 VDC, alongside digital communication via Modbus RTU over EIA RS-485.
- Display & Control Options: The VOC-R-LCD variant includes an LCD display and a relay output. Other variants provide analog and digital outputs without the local display or relay.
- Relay Specifications (VOC-R-LCD): 1 SPDT, N.O., rated at 3A @ 30VDC and 3A @ 250VAC. The default Relay Trip Point is set to 230 ppb.
- Modbus RTU Configuration: Supports configurable slave addresses (Range: 1–255), baud rates of 4800 or 9600, and parity settings (NONE, ODD, EVEN). The protocol provides registers for Product Code, Equivalent CO2 value (ppm), VOC measured value (ppb), Software version, Working state, Relay state, LED state, and Control state.
- Electrical Connections: Screw Terminal Blocks accepting wire sizes from 16 AWG (1.31 mm²) to 22 AWG (0.33 mm²). Load resistance limits are 500 Ohms maximum for 4-20 mA and 2K Ohms minimum for 0-10 VDC.
Key Product Differences
The series is distinguished by three primary model configurations:
- VOC-R: Room Mount configuration providing 4-20 mA, 0-10 VDC, and Modbus RS-485 outputs.
- VOC-R-LCD: Room Mount configuration that adds an LCD display and a relay output to the standard analog and digital signals. This variant draws 50mA supply current compared to 33mA for non-LCD models.
- VOC-D: Duct Mount configuration providing 4-20 mA, 0-10 VDC, and Modbus RS-485 outputs with an IP65 enclosure rating. The duct model weighs approximately 270g compared to ~190g for the room mount.
