España 800 900 532 | Fuera de España +34 911 776 121 | Bienvenido a nuestro nuevo sitio web. ¿Encontró algún problema o error? Por favor, infórmelo aquí.
RH-Combo-Outdoor-Air-Nickel
Humedad Relativa del Aire Exterior con Sensor RTD de Níquel
- Monitorizar la humedad del aire exterior
- Control de economizador
- Cálculos psicrométricos como entalpía y punto de rocío
- Aplicaciones de lavado
RH-Combo-Outdoor-Air-Nickel
Desde
Resumen del Producto
- Aplicaciones Monitorización medioambiental, Medición y control de fluidos
- Conexión eléctrica Terminal de tornillo
- Clasificaciones del alojamiento UL94-5VB
- Filtro Filtro hidrofóbico
- Aislamiento Teflón grabado (PTFE) Cables de colores
- Corriente, máx. 8 mA
- Tipo de medición Humedad, temperatura
- Temperatura de operación, máx. 60 °C
- Temperatura de operación mínima -40 °C
- Detalle de salida 0-5 Vcc: 12 - 40 Vcc / 18 - 28 Vca
- Humedad relativa 10 a 95%
- Tipo de sensor de humedad relativa Capacitivo con filtro hidrófobo
- Repetibilidad 0,5 % HR, ± 0,05 °C
- Tiempo de respuesta 20 segundos típico
- Sensibilidad 0,1 % HR
- ID de serie RH-Combo-Outdoor-Air-Nickel
- Estabilidad Estabilidad de HR: Deriva inferior al 2 % / 5 años, Estabilidad del RTD de níquel: +/-0,05 % después de 1000 horas a 302 °F (150 °C)
- Temperatura de almacenamiento, máx. 65 °C
- Temperatura de almacenamiento, mínima -40 °C
- Tipo de alimentación eléctrica CC
- Tensión de alimentación 24 V CC
- Tipo de sensor de temperatura RTD de níquel de 1000 ohmios
- Par de apriete 4,43 a 5,31 lb-in (0,5 a 0,6 Nm)
- Calibre del cable 26 a 16 AWG
Supported Applications
The ACI Relative Humidity with Nickel RTD Outside Air Series is a transmitter designed for use in commercial heating and cooling building management systems. It monitors relative humidity and space temperature using an integrated capacitive sensing element and a Nickel RTD sensor.
- Commercial HVAC control applications
- Outside air monitoring
Operating Conditions & Performance
The series operates within a Relative Humidity range of 0 to 95% RH, non-condensing. The measurement output spans 0-100%. Accuracy specifications vary by selected model: +/- 1% over a 20% RH Range between 20 to 90%, or +/- 2% or 3% from 10 to 95%. Operating temperature is -40 to 140°F (-40 to 60°C), with storage capability up to 149°F (65°C). The typical response time (T63) is 20 seconds. Stability is rated at less than 2% drift over 5 years.
Configuration Options
Housings and Enclosures
- Euro (-EH): ABS Plastic, UL94-V0 rating; dimensions include a front view of 4.30" (109.22mm).
- NEMA 4X (-4X): Polystyrene Plastic, UL94-V2, NEMA 4X (IP 66) rating.
Sensors and Outputs
The series features a capacitive RH sensor with a hydrophobic filter. An optional Nickel RTD temperature sensor is available as part of the configuration. Output signals are field-selectable via integral DIP switches:
- 2-wire: 4-20 mA (Factory Default)
- 3-wire: 0-5 VDC or 0-10 VDC
Power and Connections
Screw terminal blocks accept wire sizes from 16 AWG to 26 AWG. Power supply requirements depend on the output configuration:
- 4-20 mA: 15 - 40 VDC / 18 - 28 VAC (Load dependent)
- 0-5 VDC or 0-10 VDC: 12 - 40 VDC / 18 - 28 VAC
Certifications and Options
The series carries CE, UKCA, RoHS, and WEEE approvals. Three-point NIST Calibration Certificates are available as an option.
Key Product Differences
Variants differ primarily by accuracy class (RH1 for +/- 1%, RH2 for +/- 2%, RH3 for +/- 3%) and enclosure type (-O for Euro, -4X for NEMA). Model numbers follow the format A/RH<Accuracy>-1K-NI-<Configuration>. The Nickel RTD sensor output is nominal 1 KΩ at 70°F (21.1°C) with Red/Red wire colors.
PDFs y Manuales
